mdkallstar1 Posted October 19, 2015 Posted October 19, 2015 Purchased a new modem so I configured it as it was a modem/wireless router combo.I disabled router functions and attempted to configure the R1. I hadn't used the R1 for a while due to some renovations being done at my home. When I accessed router's page there were no animation no geo filter, network monitor, prioritisation.I attempted to turn on WiFi signal but after configuring the setting it just goes back to disabled never saving my settings. I tried to update firmware but get an error message firmware not signed.Any ideas?Thanks in advance.
shadow rckts Posted October 19, 2015 Posted October 19, 2015 Did you try manually updating? Also, I'm pretty sure they recommend using chrome if you have it (if you aren't already). I'm pretty sure settings are saved if you have cookies enabled in the Misc settings, also rebooting the router saves quickly (once you have cookies enabled).
fuzzy clam Posted October 19, 2015 Posted October 19, 2015 Make sure your running chrome and make sure if your using your other router it's in AP mode to avoid interference with the duma.
Netduma Staff Netduma Crossy Posted October 19, 2015 Netduma Staff Posted October 19, 2015 Also maybe try doing a reboot and re-downloading the latest update if it still won't work
Administrators Netduma Fraser Posted October 19, 2015 Administrators Posted October 19, 2015 On the wifi page are you making sure to hit apply after you have made changes? Once you've done that follow http://wiki.netduma.com/doku.php?id=manual_updateto get updated, you shouldn't have an issue if you follow these instructions. After that see if you can see things on the interface
mdkallstar1 Posted October 19, 2015 Author Posted October 19, 2015 I'm using Chrome, cookies are enabled. I've tried to manually update and fail with the message, Firmware has invalid signature, please upload a valid Netduma firmware.
Netduma Staff Netduma Crossy Posted October 19, 2015 Netduma Staff Posted October 19, 2015 I'm using Chrome, cookies are enabled. I've tried to manually update and fail with the message, Firmware has invalid signature, please upload a valid Netduma firmware. Try unplugging the Netduma for 5 mins then plugging it back in Also try re-downloading the update.
mdkallstar1 Posted October 19, 2015 Author Posted October 19, 2015 I have many times, still no change.
Administrators Netduma Fraser Posted October 20, 2015 Administrators Posted October 20, 2015 Does it come up with invalid signature even after a re download of the firmware? Both preserve settings & check version ticked?
mdkallstar1 Posted October 23, 2015 Author Posted October 23, 2015 Yes that message comes up.I've even left power off for days. I've tried and retried,downloading firmware several times.
Administrators Netduma Fraser Posted October 24, 2015 Administrators Posted October 24, 2015 That is strange, PM me and we can do a 1 on 1 and see if we can root out the issue
Recommended Posts
Archived
This topic is now archived and is closed to further replies.