NEW XR1000/XR1000v2 Beta Firmware: DumaOS 3.3.688 Access Request

[Netduma Fraser]

7 hours ago, tiago265 said:

Por favor, me adicione ao beta, obrigado! 

You already have access https://forum.netduma.com/forum/153-xr1000-beta-forum

[playtowin_best]

I would like access to the beta, Please. Thanks!

[Netduma Fraser]

2 hours ago, playtowin_best said:

I would like access to the beta, Please. Thanks!

Added https://forum.netduma.com/forum/153-xr1000-beta-forum/

[rhys_e1]

Can I please be added? Thanks!

[Netduma Fraser]

10 hours ago, rhys_e1 said:

Can I please be added? Thanks!

Added

[outsida]

Requesting access 

[Netduma Fraser]

4 hours ago, outsida said:

Requesting access 

It's not necessary now as DumaOS 3.3 appears to be available on the newest public version for the XR1000 so make sure you're on the latest and you're good to go

[mrmetallicfreak]

23 hours ago, Netduma Fraser said:

It's not necessary now as DumaOS 3.3 appears to be available on the newest public version for the XR1000 so make sure you're on the latest and you're good to go

Where do you get the update?

[Netduma Fraser]

48 minutes ago, mrmetallicfreak said:

Where do you get the update?

https://www.netgear.com/support/download/?model=XR1000

[Ratly]

Please add me to the list

 

[Netduma Fraser]

6 hours ago, Ratly said:

Please add me to the list

It's not needed anymore, the latest public version you can get from the above link has it.

[jayman4769]

On 11/10/2025 at 12:15 PM, Netduma Fraser said:

https://www.netgear.com/support/download/?model=XR1000

This link gives me a 404 error.

[Krush]

44 minutes ago, jayman4769 said:

This link gives me a 404 error.

----- XR1000 | Nighthawk WiFi 6 Pro Gaming Router ----

[Netduma Fraser]

On 12/3/2025 at 8:10 PM, jayman4769 said:

This link gives me a 404 error.

They've changed the site layout recently, the above link will work instead

[ATN90]

On 12/3/2025 at 2:55 PM, Krush said:

----- XR1000 | Nighthawk WiFi 6 Pro Gaming Router ----

Forgive me, but what are we looking for on that page to get Duma 3.3?

 Under 'Firmware and Software Downloads' it says
"Firmware Version 1.0.2.86" with "Latest" next to it.

My current firmware seems to be 1.0.64.18_5.0.18 and Duma 3.1.1

Furthermore, I downloaded the XR1000-V1.0.2.86.zip, and when I extracted it, these are the files:
-XR1000-V1.0.2.86_2.1.40.chk
-XR1000-V1.0.2.86_Release_Notes.htm

According to 'Nighthawk Pro Gaming Router Model XR1000' user manual on page 151 it says
"Note: The correct firmware file uses an .img extension."

.chk files are usually recovery fragment files

Any help would be appreciated

[Netduma Fraser]

9 hours ago, ATN90 said:

Forgive me, but what are we looking for on that page to get Duma 3.3?

 Under 'Firmware and Software Downloads' it says
"Firmware Version 1.0.2.86" with "Latest" next to it.

My current firmware seems to be 1.0.64.18_5.0.18 and Duma 3.1.1

Furthermore, I downloaded the XR1000-V1.0.2.86.zip, and when I extracted it, these are the files:
-XR1000-V1.0.2.86_2.1.40.chk
-XR1000-V1.0.2.86_Release_Notes.htm

According to 'Nighthawk Pro Gaming Router Model XR1000' user manual on page 151 it says
"Note: The correct firmware file uses an .img extension."

.chk files are usually recovery fragment files

Any help would be appreciated

The firmware you have downloaded is correct and is the latest firmware. Upload the .chk file on the firmware update page on the router

[CLXDefault]

Can i get access?

[Netduma Fraser]

3 hours ago, CLXDefault said:

Can i get access?

It's no longer needed as the latest XR1000 public firmware version includes DumaOS 3.3

[mygamertagsucks]

I would love access to the BETA, though I do have one question: have there been very many reports of users suffering the bricking issue that the XR500 ran into? To be honest, that was the only reason I bit the bullet, and upgraded to the XR1000v2. At the time, I had to purchase it through Amazon, and honestly, I'm kind of saddened by the simple stuff the 500 always got right, and the 1000v2 still hasn't managed to fix itself. Everytime I tinker with it, I wind up with no Internet connection. For the few of you that have seen this on reddit, or even the old forums, I apologize. The main issue is that when I set up a network (Comcast/Xfinity internet), it always gets the DNS servers wrong, along with the subnet mask. I have used a wired laptop, a Pixel 8 Pro, and the even a garbage laptop that some online university that my sister was "attending", running an extremely old version of windows. I can set the subnet mask, and primary and secondary DNS servers through Xfinity, or the tried and true Google DNS servers, and everything is wrong on the GUI, but if you pull down from the top of your Pixel, and look at the DNS server listed, it's actually correct! Devices all show up 255.255.255.0, while the GUI usually shows 255.255.248.0. Sometimes, while gaming, I will have great pings to dedis, but in game, get melte by someone who hasn't even loaded on my end. To make matters worse, I only have my laptop running, or my phone, so I can see the geo-filter, which is only applied to my PS5, so in theory, this should not be happening. 

I'll start a new topic about this if the mods wish, but in general, I would love access to the beta firmware.

[Netduma Fraser]

10 hours ago, mygamertagsucks said:

I would love access to the BETA, though I do have one question: have there been very many reports of users suffering the bricking issue that the XR500 ran into? To be honest, that was the only reason I bit the bullet, and upgraded to the XR1000v2. At the time, I had to purchase it through Amazon, and honestly, I'm kind of saddened by the simple stuff the 500 always got right, and the 1000v2 still hasn't managed to fix itself. Everytime I tinker with it, I wind up with no Internet connection. For the few of you that have seen this on reddit, or even the old forums, I apologize. The main issue is that when I set up a network (Comcast/Xfinity internet), it always gets the DNS servers wrong, along with the subnet mask. I have used a wired laptop, a Pixel 8 Pro, and the even a garbage laptop that some online university that my sister was "attending", running an extremely old version of windows. I can set the subnet mask, and primary and secondary DNS servers through Xfinity, or the tried and true Google DNS servers, and everything is wrong on the GUI, but if you pull down from the top of your Pixel, and look at the DNS server listed, it's actually correct! Devices all show up 255.255.255.0, while the GUI usually shows 255.255.248.0. Sometimes, while gaming, I will have great pings to dedis, but in game, get melte by someone who hasn't even loaded on my end. To make matters worse, I only have my laptop running, or my phone, so I can see the geo-filter, which is only applied to my PS5, so in theory, this should not be happening. 

I'll start a new topic about this if the mods wish, but in general, I would love access to the beta firmware.

As above you can just upgrade to the latest public version which has DumaOS 3.3 included now. Not sure what you mean regarding the XR500 bricking exactly. Not sure what you mean about the DNS either but individual devices will show the DNS as the router LAN IP. 

[mygamertagsucks]

14 hours ago, Netduma Fraser said:

As above you can just upgrade to the latest public version which has DumaOS 3.3 included now. Not sure what you mean regarding the XR500 bricking exactly. Not sure what you mean about the DNS either but individual devices will show the DNS as the router LAN IP. 

You're right. My bad. I just thought that the XR500 bricking issue was kind of a known thing. At any rate, thank you for your support over the years. I've read a lot of stuff you've written here and there, all of it is top notch stuff. 

 

[Antonello]

Il 20/12/2024 alle 12:36, Netduma Justas ha detto:

Ciao a tutti gli utenti di XR1000 e XR1000v2!

Siamo finalmente pronti con un nuovo aggiornamento DumaOS per XR1000 e XR1000v2.

Questo aggiornamento introduce aggiornamenti e correzioni per la nostra sincronizzazione cloud DPI. Gli utenti riceveranno ora le nostre ultime versioni del database DPI non appena saranno rilasciate. Ciò significa supporto per nuovi giochi in Geo-Filter, Traffic Prio e Traffic Controller. Vedrai che nuovi titoli come Marvel Rivals sono supportati in Geo-Filter e nuovi titoli come Path of Exile 2 sono supportati in Traffic Prioritization.

Abbiamo anche risolto il problema dalla versione precedente in cui non c'erano elenchi predefiniti in Adblocker. Ora puoi iniziare a bloccare gli annunci subito con il clic di un pulsante e gli elenchi si aggiorneranno automaticamente nel tempo.

Ci sono anche alcune correzioni di backend, inclusi miglioramenti della sicurezza.

Questo firmware è stato creato per correggere eventuali bug persistenti con il set di funzionalità dell'XR1000 e fornire tutte le funzionalità promesse quando l'XR1000 è stato venduto. Tuttavia non introduce nessuna delle nuove entusiasmanti funzionalità di DumaOS 4, come SmartBOOST e Geo-Filter 2.0. Per il momento, queste funzionalità sono esclusive del router da gioco Netduma R3 e non possiamo promettere che si faranno strada verso l'XR1000.

Detto questo, gli utenti XR1000 continueranno a ricevere aggiornamenti per la compatibilità con gli ultimi giochi tramite il cloud DPI di Netduma e gli aggiornamenti di sicurezza saranno forniti da Netgear.

Per richiedere l'accesso alla beta, rispondi a questo post.

Per richiedere il firmware?

[Netduma Fraser]

22 minutes ago, Antonello said:

Per richiedere il firmware?

On 12/28/2025 at 10:16 AM, Netduma Fraser said:

It's no longer needed as the latest XR1000 public firmware version includes DumaOS 3.3

^