r3 keeps disconecting daily threw the night

[steb]

its been doing this since i got the modum 2 weeks or so .. so i use plus net isp /  duma is in dmz on isp //  then on the duma reserved ip  dhcp / then dmz  to my pc /  il get up in a morning after leaving downloads going  waking up to nothing downloaded / try to log in to the browser and it wont even do that . am manulay having to unplug both then its rite until next morning ..  also . tried pppoe which dont seem to do anything /wont connect/ were am i going wrong? also man gave me firmware on facebook which has made zero difrence   thanks 

[Netduma Fraser]

Take your PC out of the DMZ, that is a major security issue, it may also be contributing to the issue. If it happens again please grab the log and I can take a look.

[steb]

thanks for the reply mate . i thought that was the right thing to do  to quickly get open nats .. okay  so have done see how that goes .  so next problem// i have 2 pcs / xbox / what need open nats / port forwarding it seems it will only let me add one device at  a time / for instance 3074 need it open on all my machines so cod is open nat . and as i say it will only let me add one device in ..  how do i sort that / and lastly i have ipvanish / i tried and failed to get it working via modum is is possible or not with vanish?  cheers   oh and were do i get log ?? 

[Netduma Fraser]

You definitely wouldn't get an Open NAT using the DMZ - you'd have to do 3074 for one device, 3075 for another, 3076 for the other. 

Can you provide the config you're using for the VPN please?

The log is in Settings > Troubleshooting.

[steb]

morning    so at least its kept downloading after removing DMZ  from pcs ..  

as for the port forwading /  can you explain a bit more because it make no sence to me if i need 3074/  your saying 3075 and 6  /  obviously other machines are moderate now other than my main pc /  how to  go about sorting the nats out on the others?? 

i think thats what your asking for .. am pritty useless when i comes to networking ... 

client
dev tun
proto udp
remote man-a01.ipvanish.com 443
resolv-retry infinite
nobind
persist-key
persist-tun
persist-remote-ip
ca ca.ipvanish.com.crt
verify-x509-name man-a01.ipvanish.com name
auth-user-pass
comp-lzo
verb 3
auth SHA256
cipher AES-256-CBC
keysize 256
tls-cipher TLS-DHE-RSA-WITH-AES-256-CBC-SHA:TLS-DHE-DSS-WITH-AES-256-CBC-SHA:TLS-RSA-WITH-AES-256-CBC-SHA

[Netduma Fraser]

It can be difficult to get an Open NAT on multiple devices, I'd suggest 3074 for the main PC, 3075 for the second PC and 3076 for the Xbox as on the Xbox itself you can also make it so it uses an alternate port which will help. You just need to make those port forwarding rules for those devices so mirror the rule you made for the main PC for the other devices and just change the port number.

That's only part of the config, there should be more, if they gave you files please upload what you received.

[steb]

cool i try that with the ports later . il have attached config folder . see if you can make heads or tales of it  //on enigma i just add my password to that what i pasted put in my certificate  and away i go . thanks  

configs.zip

[Netduma Fraser]

Try this:

Quote

 

client
dev tun
proto udp
remote man-a01.ipvanish.com 443
resolv-retry infinite
nobind
persist-key
persist-tun
persist-remote-ip
verify-x509-name man-a01.ipvanish.com name
auth-user-pass
comp-lzo
verb 3
auth SHA256
cipher AES-256-CBC
keysize 256
tls-cipher TLS-DHE-RSA-WITH-AES-256-CBC-SHA:TLS-DHE-DSS-WITH-AES-256-CBC-SHA:TLS-RSA-WITH-AES-256-CBC-SHA

<ca>
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
</ca>

 

 

[steb]

hi mate . yes that worked fine . i have a couple of niggles /  my smart boost radar map / seems to of gone half black / sure its not always been like that / whats happend there ? i have reset modum but it never fixes thought id ask .. my vpn would not work for days . but tried again just now and its working so thats that . 

[Netduma Fraser]

It is generally that color scheme, should be able to see the circle lines within it though, I can't tell if that's there or not from your photo but won't affect functionality.

[Krush]

6 hours ago, steb said:

 my smart boost radar map / seems to of gone half black /

Hi!

I think this is a graphical addition to differentiate favored DPI traffic from current DPI traffic.

On the left half circle you see the prioritized traffic and on the right half circle the non-prioritized DPI traffic!

So here everything is fine 😉

[steb]

cheers mate .  sure its only gone that like latley . .  other main thing  was testing it last night .. this has been like this for a ili while ..  so on my geo filter  in game its not lighting up / its not showing any server / info / nothing /  " it use to work perfectley weather its the new fw or not i dono"    just know it will never show anything / noticed some times games are not being prioritized when they should be .. 

[Netduma Fraser]

4 hours ago, steb said:

cheers mate .  sure its only gone that like latley . .  other main thing  was testing it last night .. this has been like this for a ili while ..  so on my geo filter  in game its not lighting up / its not showing any server / info / nothing /  " it use to work perfectley weather its the new fw or not i dono"    just know it will never show anything / noticed some times games are not being prioritized when they should be .. 

Try this:

1. Quit the application/game/client completely
2. Remove device from the Geo-Filter
3. Give PC PlayStation Device Type in the Device Manager (if on PC)
4. Resync from the Geo-Filter Map menu
5. Re-add the device to the Geo-Filter
6. Set up the Geo-Filter how you like
7. Wait 2 minutes
8. Boot up application/game/client

Then see if it works better. You won't be able to stabilize/ping every server unfortunately but we're working on a new ping method which may make this more reliable in future.

[steb]

hi mate /  pick your brains again .. so say i play plants v zombies gw2  a few others . how do i go about prioritising games what aint prioritised arnt on  the list ??  i read another post you were helping someone same problem 2 years ago tho and i dont understand properly to be able to do it so thought id ask .

[Netduma Fraser]

2 hours ago, steb said:

hi mate /  pick your brains again .. so say i play plants v zombies gw2  a few others . how do i go about prioritising games what aint prioritised arnt on  the list ??  i read another post you were helping someone same problem 2 years ago tho and i dont understand properly to be able to do it so thought id ask .

So if you're on the very latest R3 Early Access version then now there is a feature called Behavioral Identification which basically means even though it doesn't know what game you're playing it can tell you're playing a game and will then prioritize it.

The other option is to just prioritize the device you're playing on

[steb]

yes am on the latest early acesss version /   next problem i seem to have is playing fortnite . my geo location is set around the uk . can play one or 2 games at first there at london / then suddenly will start to put me in france.. frankfukt  .. i tried blocking them . but they seem to just come back on blocked .. realisticly i dont understand why is alowing to go out the uk .. for instance cod  it just takes a while sometimes for a game searching coz am only in uk .. if you circle is set to small  it just says unable to find a data center ///  so am baffled whats going on with fortnite / is there any way to fix it so it will not go out the uk??  cheers 

[Netduma Fraser]

It's because you have Geo-Latency enabled, though I would suggest keeping it enabled otherwise you'll block a server outside the radius and have a very long wait for it to kick you back to the lobby but you can try that if you wish by disabling it

[steb]

whats geo latency??  weres that ?  thats why its going out of radius?.. odd its only fortnite being like this .. 

[Netduma Fraser]

In the Geo-Filter menu  you can disable it there. It can happen with other games as well but due to how Fortnite filters (I alluded to it above) it's going to favor you getting into a game rather than kicking you out even if the server wouldn't be good.

[steb]

hi mate am back again / i have serious problems now were bye at first getting ping fluchating when in game / when swiching iptv chanells over .. it will go from 10ms to 50 and slowly back to 10 flick station over and same thing happens 
if i download something my in game ping/ pc  is all over // its set to 80% congestion/ i have downgraded but the problem sitll on going been messing since friday  it never use to like this all use to be good but now its like so how do i fix it? i have tried 
turning off my vpn / reset device / downgraded .  its still doing the same thing . its odd as youtube 4k streaming is fine when playing cod my ping stays on 10ms / but not iptv . tested my isp modum doing the same thing and thats solid on 10ms so its telling me
its something to do with the r3  it went like this friday  / tried disabling / smart boost no difrence still bounces about when swiching chanell ..   i hope theres a fix its next to useless at the mo    thanks 

[Netduma Fraser]

Are ALL devices connected to the R3?

What are the speeds you pay for/receive? 

Have you entered those speeds into the router?

How have you setup SmartBOOST?

[steb]

hi mate /  yes all devices are connected to the r3 /  i get 60mb   and yes my speeds are entered  in my network speeds  /  i only have gaming selected `on my priority list /   like i say watching plex / playing cod / ping is all over  or when a torrent is playing/downloading / 

[steb]

@fraser any chance of help again please carnt seem to suss it out . basicly using proton vpn free  how can i add that to r3  i dont understand what your suppost to do you done it last time for me . 

# ==============================================================================
# Copyright (c) 2023 Proton AG (Switzerland)
# Email: [email protected]
#
# The MIT License (MIT)
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in all
# copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR # OTHERWISE, ARISING
# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
# IN THE SOFTWARE.
# ==============================================================================

# The server you are connecting to is using a circuit in order to separate entry IP from exit IP
# The same entry IP allows to connect to multiple exit IPs in the same data center.

# If you want to explicitly select the exit IP corresponding to server CA-FREE#8 you need to
# append a special suffix to your OpenVPN username.
# Please use "LUjAxA5eUX3FPJS7+b:0" in order to enforce exiting through CA-FREE#8.

# If you are a paying user you can also enable the ProtonVPN ad blocker (NetShield) or Moderate NAT:
# Use: "LUjAxA5eUX3FPJS7+b:0+f1" to enable anti-malware filtering
# Use: "LUjAxA5eUX3FPJS7+b:0+f2" to additionally enable ad-blocking filtering
# Use: "LUjAxA5eUX3FPJS7+b:0+nr" to enable Moderate NAT
# Note that you can combine the "+nr" suffix with other suffixes.

client
dev tun
proto tcp

remote 149.22.82.28 7770
remote 149.22.82.28 8443
remote 149.22.82.28 443

remote-random
resolv-retry infinite
nobind

cipher AES-256-GCM

setenv CLIENT_CERT 0
tun-mtu 1500
mssfix 0
persist-key
persist-tun

reneg-sec 0

remote-cert-tls server
auth-user-pass

<ca>
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
</ca>

<tls-crypt>
-----BEGIN OpenVPN Static key V1-----
6acef03f62675b4b1bbd03e53b187727
423cea742242106cb2916a8a4c829756
3d22c7e5cef430b1103c6f66eb1fc5b3
75a672f158e2e2e936c3faa48b035a6d
e17beaac23b5f03b10b868d53d03521d
8ba115059da777a60cbfd7b2c9c57472
78a15b8f6e68a3ef7fd583ec9f398c8b
d4735dab40cbd1e3c62a822e97489186
c30a0b48c7c38ea32ceb056d3fa5a710
e10ccc7a0ddb363b08c3d2777a3395e1
0c0b6080f56309192ab5aacd4b45f55d
a61fc77af39bd81a19218a79762c3386
2df55785075f37d8c71dc8a42097ee43
344739a0dd48d03025b0450cf1fb5e8c
aeb893d9a96d1f15519bb3c4dcb40ee3
16672ea16c012664f8a9f11255518deb
-----END OpenVPN Static key V1-----
</tls-crypt>
 

[Netduma Fraser]

Just enter the config: 

client
dev tun
proto tcp

remote 149.22.82.28 7770
remote 149.22.82.28 8443
remote 149.22.82.28 443

remote-random
resolv-retry infinite
nobind

cipher AES-256-GCM

setenv CLIENT_CERT 0
tun-mtu 1500
mssfix 0
persist-key
persist-tun

reneg-sec 0

remote-cert-tls server
auth-user-pass

<ca>
-----BEGIN CERTIFICATE-----
MIIFnTCCA4WgAwIBAgIUCI574SM3Lyh47GyNl0WAOYrqb5QwDQYJKoZIhvcNAQEL
BQAwXjELMAkGA1UEBhMCQ0gxHzAdBgNVBAoMFlByb3RvbiBUZWNobm9sb2dpZXMg
QUcxEjAQBgNVBAsMCVByb3RvblZQTjEaMBgGA1UEAwwRUHJvdG9uVlBOIFJvb3Qg
Q0EwHhcNMTkxMDE3MDgwNjQxWhcNMzkxMDEyMDgwNjQxWjBeMQswCQYDVQQGEwJD
SDEfMB0GA1UECgwWUHJvdG9uIFRlY2hub2xvZ2llcyBBRzESMBAGA1UECwwJUHJv
dG9uVlBOMRowdelightfulDVQQDDBFQcm90b25WUE4gUm9vdCBDQTCCAiIwDQYJKoZIhvcN
AQEBBQADggIPADCCAgoCggIBAMkUT7zMUS5C+NjQ7YoGpVFlfbN9HFgG4JiKfHB8
QxnPPRgyTi0zVOAj1ImsRilauY8Ddm5dQtd8qcApoz6oCx5cFiiSQG2uyhS/59Zl
5wqIkw1o+CgwZgeWkq04lcrxhhfPgJZRFjrYVezy/Z2Ssd18s3/FFNQ+2iV1KC2K
z8eSPr50u+l9vEKsKiNGkJTdlWjoDKZM2C15i/h8Smi+PdJlx7WMTtYoVC1Fzq0r
aCPDQl18kspu11b6d8ECPWghKcDIIKuA0r0nGqF1GvH1AmbC/xUaNrKgz9AfioZL
MP/l22tVG3KKM1ku0eYHX7NzNHgkM2JKnBBannImQQBGTAcvvUlnfF3AHx4vzx7H
ahpBz8ebThx2uv+vzu8lCVEcKjQObGwLbAONJN2enug8hwSSZQv7tz7onDQWlYh0
El5fnkrEQGbukNnSyOqTwfobvBllIPzBqdO38eZFA0YTlH9plYjIjPjGl931lFAA
3G9t0x7nxAauLXN5QVp1yoF1tzXc5kN0SFAasM9VtVEOSMaGHLKhF+IMyVX8h5Iu
IRC8u5O672r7cHS+Dtx87LjxypqNhmbf1TWyLJSoh0qYhMr+BbO7+N6zKRIZPI5b
MXc8Be2pQwbSA4ZrDvSjFC9yDXmSuZTyVo6Bqi/KCUZeaXKof68oNxVYeGowNeQd
g/znAgMBAAGjUzBRMB0GA1UdDgQWBBR44WtTuEKCaPPUltYEHZoyhJo+4TAfBgNV
HSMEGDAWgBR44WtTuEKCaPPUltYEHZoyhJo+4TAPBgNVHRMBAf8EBTADAQH/MA0G
CSqGSIb3DQEBCwUAA4ICAQBBmzCQlHxOJ6izys3TVpaze+rUkA9GejgsB2DZXIcm
4Lj/SNzQsPlZRu4S0IZV253dbE1DoWlHanw5lnXwx8iU82X7jdm/5uZOwj2NqSqT
bTn0WLAC6khEKKe5bPTf18UOcwN82Le3AnkwcNAaBO5/TzFQVgnVedXr2g6rmpp9
gdedeEl9acB7xqfYfkrmijqYMm+xeG2rXaanch3HjweMDuZdT/Ub5G6oir0Kowft
lA1ytjXRg+X+yWymTpF/zGLYfSodWWjMKhpzZtRJZ+9B0pWXUyY7SuCj5T5SMIAu
x3NQQ46wSbHRolIlwh7zD7kBgkyLe7ByLvGFKa2Vw4PuWjqYwrRbFjb2+EKAwPu6
VTWz/QQTU8oJewGFipw94Bi61zuaPvF1qZCHgYhVojRy6KcqncX2Hx9hjfVxspBZ
DrVH6uofCmd99GmVu+qizybWQTrPaubfc/a2jJIbXc2bRQjYj/qmjE3hTlmO3k7V
EP6i8CLhEl+dX75aZw9StkqjdpIApYwX6XNDqVuGzfeTXXclk4N4aDPwPFM/Yo/e
KnvlNlKbljWdMYkfx8r37aOHpchH34cv0Jb5Im+1H07ywnshXNfUhRazOpubJRHn
bjDuBwWS1/Vwp5AJ+QHsPXhJdl3qHc1szJZVJb3VyAWvG/bWApKfFuZX18tiI4N0
EA==
-----END CERTIFICATE-----
</ca>

<tls-crypt>
-----BEGIN OpenVPN Static key V1-----
6acef03f62675b4b1bbd03e53b187727
423cea742242106cb2916a8a4c829756
3d22c7e5cef430b1103c6f66eb1fc5b3
75a672f158e2e2e936c3faa48b035a6d
e17beaac23b5f03b10b868d53d03521d
8ba115059da777a60cbfd7b2c9c57472
78a15b8f6e68a3ef7fd583ec9f398c8b
d4735dab40cbd1e3c62a822e97489186
c30a0b48c7c38ea32ceb056d3fa5a710
e10ccc7a0ddb363b08c3d2777a3395e1
0c0b6080f56309192ab5aacd4b45f55d
a61fc77af39bd81a19218a79762c3386
2df55785075f37d8c71dc8a42097ee43
344739a0dd48d03025b0450cf1fb5e8c
aeb893d9a96d1f15519bb3c4dcb40ee3
16672ea16c012664f8a9f11255518deb
-----END OpenVPN Static key V1-----
</tls-crypt>

into the config box on the VPN page and enter the credentials of proton vpn in the appropriate boxes and see if it will connect.

[steb]

morning mate .. says .. Sat Jul 18 09:19:25 2026 OpenVPN 2.4.9 arm-buildroot-linux-gnueabi [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] Sat Jul 18 09:19:25 2026 library versions: OpenSSL 1.1.1f 31 Mar 2020, LZO 2.10 Sat Jul 18 09:19:25 2026 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Sat Jul 18 09:19:25 2026 OpenSSL: error:09091064:PEM routines:PEM_read_bio_ex:bad base64 decode Sat Jul 18 09:19:25 2026 Cannot load CA certificate file [[INLINE]] (no entries were read) Sat Jul 18 09:19:25 2026 Exiting due to fatal error Error: CONNECTION TIMEOUT