r3 keeps disconecting daily threw the night

[steb]

its been doing this since i got the modum 2 weeks or so .. so i use plus net isp /  duma is in dmz on isp //  then on the duma reserved ip  dhcp / then dmz  to my pc /  il get up in a morning after leaving downloads going  waking up to nothing downloaded / try to log in to the browser and it wont even do that . am manulay having to unplug both then its rite until next morning ..  also . tried pppoe which dont seem to do anything /wont connect/ were am i going wrong? also man gave me firmware on facebook which has made zero difrence   thanks 

[Netduma Fraser]

Take your PC out of the DMZ, that is a major security issue, it may also be contributing to the issue. If it happens again please grab the log and I can take a look.

[steb]

thanks for the reply mate . i thought that was the right thing to do  to quickly get open nats .. okay  so have done see how that goes .  so next problem// i have 2 pcs / xbox / what need open nats / port forwarding it seems it will only let me add one device at  a time / for instance 3074 need it open on all my machines so cod is open nat . and as i say it will only let me add one device in ..  how do i sort that / and lastly i have ipvanish / i tried and failed to get it working via modum is is possible or not with vanish?  cheers   oh and were do i get log ?? 

[Netduma Fraser]

You definitely wouldn't get an Open NAT using the DMZ - you'd have to do 3074 for one device, 3075 for another, 3076 for the other. 

Can you provide the config you're using for the VPN please?

The log is in Settings > Troubleshooting.

[steb]

morning    so at least its kept downloading after removing DMZ  from pcs ..  

as for the port forwading /  can you explain a bit more because it make no sence to me if i need 3074/  your saying 3075 and 6  /  obviously other machines are moderate now other than my main pc /  how to  go about sorting the nats out on the others?? 

i think thats what your asking for .. am pritty useless when i comes to networking ... 

client
dev tun
proto udp
remote man-a01.ipvanish.com 443
resolv-retry infinite
nobind
persist-key
persist-tun
persist-remote-ip
ca ca.ipvanish.com.crt
verify-x509-name man-a01.ipvanish.com name
auth-user-pass
comp-lzo
verb 3
auth SHA256
cipher AES-256-CBC
keysize 256
tls-cipher TLS-DHE-RSA-WITH-AES-256-CBC-SHA:TLS-DHE-DSS-WITH-AES-256-CBC-SHA:TLS-RSA-WITH-AES-256-CBC-SHA

[Netduma Fraser]

It can be difficult to get an Open NAT on multiple devices, I'd suggest 3074 for the main PC, 3075 for the second PC and 3076 for the Xbox as on the Xbox itself you can also make it so it uses an alternate port which will help. You just need to make those port forwarding rules for those devices so mirror the rule you made for the main PC for the other devices and just change the port number.

That's only part of the config, there should be more, if they gave you files please upload what you received.

[steb]

cool i try that with the ports later . il have attached config folder . see if you can make heads or tales of it  //on enigma i just add my password to that what i pasted put in my certificate  and away i go . thanks  

configs.zip

[Netduma Fraser]

Try this:

Quote

 

client
dev tun
proto udp
remote man-a01.ipvanish.com 443
resolv-retry infinite
nobind
persist-key
persist-tun
persist-remote-ip
verify-x509-name man-a01.ipvanish.com name
auth-user-pass
comp-lzo
verb 3
auth SHA256
cipher AES-256-CBC
keysize 256
tls-cipher TLS-DHE-RSA-WITH-AES-256-CBC-SHA:TLS-DHE-DSS-WITH-AES-256-CBC-SHA:TLS-RSA-WITH-AES-256-CBC-SHA

<ca>
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
</ca>

 

 

[steb]

hi mate . yes that worked fine . i have a couple of niggles /  my smart boost radar map / seems to of gone half black / sure its not always been like that / whats happend there ? i have reset modum but it never fixes thought id ask .. my vpn would not work for days . but tried again just now and its working so thats that . 

[Netduma Fraser]

It is generally that color scheme, should be able to see the circle lines within it though, I can't tell if that's there or not from your photo but won't affect functionality.

[Fuzy]

6 hours ago, steb said:

 my smart boost radar map / seems to of gone half black /

Hi!

I think this is a graphical addition to differentiate favored DPI traffic from current DPI traffic.

On the left half circle you see the prioritized traffic and on the right half circle the non-prioritized DPI traffic!

So here everything is fine 😉

[steb]

cheers mate .  sure its only gone that like latley . .  other main thing  was testing it last night .. this has been like this for a ili while ..  so on my geo filter  in game its not lighting up / its not showing any server / info / nothing /  " it use to work perfectley weather its the new fw or not i dono"    just know it will never show anything / noticed some times games are not being prioritized when they should be .. 

[Netduma Fraser]

4 hours ago, steb said:

cheers mate .  sure its only gone that like latley . .  other main thing  was testing it last night .. this has been like this for a ili while ..  so on my geo filter  in game its not lighting up / its not showing any server / info / nothing /  " it use to work perfectley weather its the new fw or not i dono"    just know it will never show anything / noticed some times games are not being prioritized when they should be .. 

Try this:

1. Quit the application/game/client completely
2. Remove device from the Geo-Filter
3. Give PC PlayStation Device Type in the Device Manager (if on PC)
4. Resync from the Geo-Filter Map menu
5. Re-add the device to the Geo-Filter
6. Set up the Geo-Filter how you like
7. Wait 2 minutes
8. Boot up application/game/client

Then see if it works better. You won't be able to stabilize/ping every server unfortunately but we're working on a new ping method which may make this more reliable in future.