guardar configuración de router

[jacksonpujols]

saludos, lo que pasa es que cuando se apaga mi Netduma R2 se me borra toda la configuración que había realizado, que puedo hacer para que se guarde la configuración que allá hecho ?    

[DARKNESS]

There no backup feature so unfortunately you have to redo the setup. What firmware version are you using? That not normal if you power it off and lose all settings.

[jacksonpujols]

im using 3.3.280, i just make the update recently and when my router reset all my settings gone!! im thinking go back to the other one

[DARKNESS]

@jacksonpujolsWell that probably normal if you were on a pretty old build you should just factory reset just in case if there any other bugs from the web interference.

[jacksonpujols]

It won't let me reset it to factory settings, I can't install an old version either, it won't let me do anything, all this after I update to the latest version.

[Netduma Fraser]

You don't need to unplug the router everyday - they're designed to be always on and use very little power. Make your settings changes then reboot from the interface, wait 4 minutes, then everything should be saved if you unplug again

[jacksonpujols]

I did what it said, reboot, but nothing was saved, it went back to the beginning, every time I reboot the router oh it shuts down it puts me a different ip WAN.

[Krush]

The Wan IP corresponds to the DHCP IP of your main router. 192.168.1.XXX
It may change if you have not reserved the IP in advance.
What type of IP are you expecting?

[Netduma Fraser]

As above the WAN IP changing is normal. Are you having to do the Setup Wizard each time you plug it back in?

[jacksonpujols]

exactly, every time I connect it I have to go through the configuration wizard

[Netduma Fraser]

Do a factory reset from the interface, close the tab, wait 4 minutes, access, complete the wizard, make your changes, use it for at least a few hours, then reboot from the interface, wait 4 minutes then access and unplug later that day and see if it works then

[jacksonpujols]

It also doesn't let me do a factory reset, when I hit reset it just updates the page and nothing happens.

[Netduma Fraser]

If you refresh the page you can still access it when it should be resetting? Do the lights on the router cycle?

[jacksonpujols]

Exactly, only the page is updated, it is not reset, the lights work the same.

 

[jacksonpujols]

[jacksonpujols]

Do you think there is no solution?