Killerelite06 Posted February 21 Share Posted February 21 SETUP: ONT-Asus AX88U- Netduma R3 (DHCP/Static) Firmware: 4.0.41 QoS bug: After a few hours of gaming and watching Twitch streams QoS slows down devices to a few kbps until you disable/enable QoS. UI also loads slowly until the QoS restart Warzone - Stuck on waiting for the host never shows the stabilized message, adds the latency but ping fluctuates by 3-5ms. To open NAT on CoD I have to restart the router before it opens the ports Rainbow Six Siege- Doesn't stabilize and pings the matchmaking server as if it were the host (ingame ping 6ms ping on router 200ms+) Fortnite- Stablizes multiple times in a match Link to comment Share on other sites More sharing options...
ChrisG82 Posted February 21 Share Posted February 21 Try to Connect the R3 directly to the ONT… Cascading routers is always a bad idea Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 22 Administrators Share Posted February 22 When this happens, if you have a look at the CPU/memory do you notice it being used a lot? Does SmartBOOST show the same amount of traffic being used or is it using up everything? How do you have Congestion Control set? Link to comment Share on other sites More sharing options...
Killerelite06 Posted February 22 Author Share Posted February 22 1 hour ago, Netduma Fraser said: When this happens, if you have a look at the CPU/memory do you notice it being used a lot? Does SmartBOOST show the same amount of traffic being used or is it using up everything? How do you have Congestion Control set? The only thing running currently is 3 Twitch streams. It shouldn't cap out a 500Mbps line My congestion control is 90%/90% Always on Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 22 Administrators Share Posted February 22 That all looks fine, when it happens could you get the log please? Killerelite06 1 Link to comment Share on other sites More sharing options...
Spdsk8race Posted February 22 Share Posted February 22 I believe this may be what is causing issues with slow wifi/slow wired connections. It would make sense to some level as when the router crashes from a geofilter resync, and the admin page gets stuck on loading page the WiFi, wired speeds dramatically increase until the device reboots Link to comment Share on other sites More sharing options...
TheTerpinator710 Posted February 22 Share Posted February 22 1 hour ago, Killerelite06 said: The only thing running currently is 3 Twitch streams. It shouldn't cap out a 500Mbps line My congestion control is 90%/90% Always on Literally one of my exact issues.. i have 1000mbps but only getting 300.. so damn odd. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 22 Administrators Share Posted February 22 59 minutes ago, Spdsk8race said: I believe this may be what is causing issues with slow wifi/slow wired connections. It would make sense to some level as when the router crashes from a geofilter resync, and the admin page gets stuck on loading page the WiFi, wired speeds dramatically increase until the device reboots Are you saying if you manually resync the cloud that you can reproduce this issue? 56 minutes ago, TheTerpinator710 said: Literally one of my exact issues.. i have 1000mbps but only getting 300.. so damn odd. That's likely to be something else, are you using PPPoE? Link to comment Share on other sites More sharing options...
TheTerpinator710 Posted February 22 Share Posted February 22 24 minutes ago, Netduma Fraser said: Are you saying if you manually resync the cloud that you can reproduce this issue? That's likely to be something else, are you using PPPoE? nope, im using DCHP.. but if i test with my back up router, my speeds are just fine.. 100% to do with the R3.. Link to comment Share on other sites More sharing options...
Spdsk8race Posted February 22 Share Posted February 22 40 minutes ago, Netduma Fraser said: Are you saying if you manually resync the cloud that you can reproduce this issue? That's likely to be something else, are you using PPPoE? I can reproduce this issue, but only after the router have been up for 3 or more days.. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 22 Administrators Share Posted February 22 37 minutes ago, TheTerpinator710 said: nope, im using DCHP.. but if i test with my back up router, my speeds are just fine.. 100% to do with the R3.. Are you testing on the router speed test or speedtest.net? Is speed test bypass enabled? 21 minutes ago, Spdsk8race said: I can reproduce this issue, but only after the router have been up for 3 or more days.. What kind of network traffic is there over those days? The more information the better as we can more closely try to reproduce it then. Link to comment Share on other sites More sharing options...
Gskillz Posted February 22 Share Posted February 22 2 hours ago, Spdsk8race said: I believe this may be what is causing issues with slow wifi/slow wired connections. It would make sense to some level as when the router crashes from a geofilter resync, and the admin page gets stuck on loading page the WiFi, wired speeds dramatically increase until the device reboots @Netduma Fraser Same here I have to physically turn off/on the R3 everyday, gets stuck on reloading the page. Does not matter what web browser I'm using. Link to comment Share on other sites More sharing options...
TheTerpinator710 Posted February 22 Share Posted February 22 16 minutes ago, Netduma Fraser said: Are you testing on the router speed test or speedtest.net? Is speed test bypass enabled? What kind of network traffic is there over those days? The more information the better as we can more closely try to reproduce it then. I’m testing via The router speed test.. and Speedtest bypass is on.. Link to comment Share on other sites More sharing options...
TheTerpinator710 Posted February 22 Share Posted February 22 2 minutes ago, TheTerpinator710 said: I’m testing via The router speed test.. and Speedtest bypass is on.. use to show 800+ but download but hardly reaches 100 lol. I’ve restored this router about 4-5 times in the last 3 days.. Link to comment Share on other sites More sharing options...
Gskillz Posted February 22 Share Posted February 22 @TheTerpinator710 @Netduma Fraser Every time I restart my R3 at least one of my ports is not running at full speed. TheTerpinator, take the ethernet wire out of one port and put it on another port, then do another speed test, I bet this will increase your speeds. for some odd reason 3 out of the 4 ports run at full speed. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 23 Administrators Share Posted February 23 Don't use the built in speed test, use speedtest.net, do you see the same reduced speeds? Link to comment Share on other sites More sharing options...
Killerelite06 Posted February 25 Author Share Posted February 25 On 2/22/2024 at 9:58 PM, Netduma Fraser said: That all looks fine, when it happens could you get the log please? R3_2024-02-25T14_05_51.345Z_logs.txt Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 25 Administrators Share Posted February 25 4 hours ago, Killerelite06 said: R3_2024-02-25T14_05_51.345Z_logs.txt 134.66 kB · 0 downloads What device is 192.168.50.227? It's using port 3074 and is flooding the logs so wouldn't be surprised if whatever that device is is causing the issue Link to comment Share on other sites More sharing options...
Gskillz Posted February 25 Share Posted February 25 On 2/22/2024 at 7:02 PM, Netduma Fraser said: Don't use the built in speed test, use speedtest.net, do you see the same reduced speeds? I'm using Speedtest.net, wired connected to my computer. Problem still persist with one port always slow and the others running fine. Link to comment Share on other sites More sharing options...
Killerelite06 Posted February 25 Author Share Posted February 25 20 minutes ago, Netduma Fraser said: What device is 192.168.50.227? It's using port 3074 and is flooding the logs so wouldn't be surprised if whatever that device is is causing the issue That's the Netduma R3 router... Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 25 Administrators Share Posted February 25 48 minutes ago, Gskillz said: I'm using Speedtest.net, wired connected to my computer. Problem still persist with one port always slow and the others running fine. Could you make a new topic please and we'll help you there. 38 minutes ago, Killerelite06 said: That's the Netduma R3 router... So that's its WAN IP then? What device is using port 3074, if you're not sure check UPnP Link to comment Share on other sites More sharing options...
Killerelite06 Posted February 26 Author Share Posted February 26 12 hours ago, Netduma Fraser said: Could you make a new topic please and we'll help you there. So that's its WAN IP then? What device is using port 3074, if you're not sure check UPnP Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 26 Administrators Share Posted February 26 Looks like the console was on and active for about 7 hours is that right? Were you watching twitch on it as well? Link to comment Share on other sites More sharing options...
Killerelite06 Posted February 26 Author Share Posted February 26 28 minutes ago, Netduma Fraser said: Looks like the console was on and active for about 7 hours is that right? Were you watching twitch on it as well? Console- Games.Edit: CoD keeps pinging servers even if you sit at the main menu. Macbook- Twitch Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 26 Administrators Share Posted February 26 Were you hosting a game with friends or the party leader? There was multiple IP addresses attempting connections with you in the same second. Were you playing the entire 7 hours? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now