Moderate nat type ps5

[Netduma Fraser]

As a test could you put the PC in the DMZ and then check? Once done remove it as it is a security risk

[Westy147]

This made my nat type open but I can't connect to party's when I'm on ethernet only on wireless but unable to play on WiFi due to poor connection 

[modM84]

Hi.

Whats the best Port Forwarding Settings for PS5 and Call of Duty?

[Exe_uz]

https://portforward.com/call-of-duty-modern-warfare-iii/

[modM84]

Thx! I tried this, but I can't save it. Get the message, unknown error!? 

Where is my mistake? 

[Exe_uz]

Try as below buddy 

[Exe_uz]

U will need to port forward to the STATIC IP ADDRESS of your PS5, i.e. mine is 192.168.77.44

[Westy147]

Thank you I have just tried this still no luck 

[Netduma Fraser]

17 hours ago, Westy147 said:

Thank you I have just tried this still no luck 

If it was open with the DMZ then it can be opened, have you made any other port forwarding rules or traffic rules, static routes etc?

[Westy147]

Nothing else then what I sent and we have discussed. when my pc is in the dmz the nat type is open

[Netduma Fraser]

48 minutes ago, Westy147 said:

Nothing else then what I sent and we have discussed. when my pc is in the dmz the nat type is open

If you have a look at stats for nerds on the SmartBOOST page when playing does it show any ports the game is using at the time?

[Westy147]

[Netduma Fraser]

Thank you, okay so the destination port is different, if you make a port range rule:

Source start 3074
Source end 3074
Destination start 1024
Destination end 65535
TCP/UDP

Does that then allow you to get an Open NAT?
 

[Westy147]

Yes fraser you beauty thank you 😊 

[Gskillz]

@Westy147 If you have your modem is  in strict mode and you try to join anyone outside your restricted area it will block you from joining there party. You can click them on the geo filters map(if you know what state or area they are in) and then allow them, then you should be able to join their party. Give it a try it should work. If you are having issues with NAt Type, I would put your main router on bridge mode( you can google how to do that... google your model number ) that should fix the problem then it will show open in the game. Me personally, decided not to use the internet service provided router, I connect my R3 straight to the wall and it works. Some internet providers allow you to use customer own routers.

[Westy147]

Thank you my nat type is open but haven't tried party chat yet I will try this tomorrow thank you 

[Netduma Fraser]

1 hour ago, Westy147 said:

Yes fraser you beauty thank you 😊 

Great to hear that, thanks for the update!

[04tsx]

Won’t open ports

[Rossi300]

This post might help you get open nat on COD. It helped me greatly for hit detection and open NAT. If you are getting NAT type 2 on PS5 that is the best you can do without putting your PS5 in to DMZ mode.

 

[04tsx]

Didn’t work 

[Netduma Fraser]

9 hours ago, 04tsx said:

Won’t open ports

12 hours ago, Netduma Fraser said:

Thank you, okay so the destination port is different, if you make a port range rule:

Source start 3074
Source end 3074
Destination start 1024
Destination end 65535
TCP/UDP

Does that then allow you to get an Open NAT?
 

Try this that I posted above

[04tsx]

Tried that originally.  Didn’t work either

[04tsx]

It says Nat type 2 now after reboot. But all those ports still say inactive….  

[Netduma Fraser]

3 hours ago, 04tsx said:

It says Nat type 2 now after reboot. But all those ports still say inactive….  

NAT Type 2 is open so that's good. It's reporting incorrectly, if its open then they'll be working

[Psyco-Mengo]

I'm having the same issue with the moderate NAT. This wasn't an issue with the older updates. This is so frustrating!