CANT OPEN NAT TYPE ON COD

[iOrcus]

I tried opening my nat type from moderate after port forwarding 3074 tcp and udp on pc but nothing changed. Help 

[Netduma Fraser]

What is the model of the modem/router the R3 is connected to and how have you set that to ensure all traffic flows to the R3? E.g. R3 in its DMZ, modem/bridge mode

[iOrcus]

@Netduma Fraser

The modern i got is through my internet provider xfinity. I will post a picture the information. I have the R3 with a static ip to the modern and I also have the R3 set up in DMZ on the modern. Plus I have my gaming pc setup with a static ip address on the R3 + I also port forwarding warzone/mw3 ports. I even tried turn it off upnp while doing all the above and also turning upnp on, but nothing changes. I'm still on a moderate nat type.

Edited January 27, 2024 by iOrcus

[Netduma Fraser]

As a test if you put the PC in the DMZ on the R3 do you get open then? Either way remove it as it is a security risk

[iOrcus]

No I haven't done that yet. But probably won't do it due to making my pc vulnerable. I'm gonna try to bridge my modern, I've been reading online about it, where people saying it helps with open nat type. 

[TheTerpinator710]

19 hours ago, iOrcus said:

I tried opening my nat type from moderate after port forwarding 3074 tcp and udp on pc but nothing changed. Help 

Im with xfinity too, I had to do the port forward settings directly in the xfinity moden. And it worked. 

[TheTerpinator710]

1 minute ago, TheTerpinator710 said:

Im with xfinity too, I had to do the port forward settings directly in the xfinity moden. And it worked. 

In the xfinity app, go to WiFi, View WiFi equipment, advance settings, port forwarding and add the 3074 port and it should work for ya.

[iOrcus]

But I'm using the R3. My R3 is connected to my xfinity modern. Will still work? @TheTerpinator710

Edited January 28, 2024 by iOrcus

[Netduma Fraser]

It'd work you'd just need to port forward all the ports to the router

[TheTerpinator710]

9 hours ago, iOrcus said:

But I'm using the R3. My R3 is connected to my xfinity modern. Will still work? @TheTerpinator710

Yes it’ll still work. My r3 is connected to my xfinity modem too. And had to do the port in the xfinity side..

 

 

did it work for you?   

[iOrcus]

nothing worked

[dubNinja]

Renew your DCHP in your modem. 

[TheTerpinator710]

36 minutes ago, iOrcus said:

nothing worked

Did you reboot your pc after doing the port in your xfinity router? 
 

idk why It’s not working for you.. worked for me. 

[Netduma Fraser]

Just to double check, have you ever had an Open NAT? If you connect directly to the modem do you get an Open NAT?

[iOrcus]

@TheTerpinator710 @Netduma Fraser I fixed it thank you guys. It's now says open. But I can't find games for warzone still same story as before, the servers inside my geofilter circle just stays blinking and not connecting me to a game. I tried EVERYTHING  setting wise 😪  I'm exhausted. Sorry fellas I'm just frustrated not being able to find games to play in warzone. 

Edited January 28, 2024 by iOrcus

[TODDzillaInLA]

are you using battlenet or steam?

[iOrcus]

@TODDzillaInLA Battlenet

[Netduma Fraser]

On 1/31/2024 at 2:14 AM, iOrcus said:

@TODDzillaInLA Battlenet

Have you tried the .41 firmware to see if it works on that one?

[iOrcus]

@Netduma Fraser I have open nat type already. I figured out how to fix it. Im still on .20 firmware. I see too many people complaining about new issues with these NEW firmwares lately. 

[Netduma Fraser]

Glad to hear it is resolved. It is a support forum so you'll only see issues posted here, it's a small percentage of the customer base.