CC Set, but not followed

[mindlash]

While I can't do a speed test 'yet' on my router, speedtest.net shows I'm at 580/23 ... I set CC to 500/20 with 85.5% on each -- Even still, when I do a speed test, I get full up/down bandwidth.

[Zippy]

Hello @mindlash

  One thing to double check is make sure you have IPV6 disabled on LAN and WAN.. Then test again to see if your still getting your full speeds..

See if CC works and post back if your still having issues..

Thanks!

Zippy.

[Netduma Fraser]

Do try the above, that should get you sorted

[mindlash]

On 12/28/2023 at 11:47 PM, Zippy said:

One thing to double check is make sure you have IPV6 disabled on LAN and WAN.. Then test again to see if your still getting your full speeds..

After making said changes to IPv6, and using the following settings:

When I turned Speed Test Bypass OFF I got: (too much?)

When I turned Speed Test Bypass ON I got: (as expected)

So, CC is working - but overdoing it?
90.5% of 550 should be 497.75, and 85% of 23 should be 19.55

Note, that little to no traffic was happening during this test, network-wide.

[Zippy]

1 hour ago, mindlash said:

After making said changes to IPv6, and using the following settings:

When I turned Speed Test Bypass OFF I got: (too much?)

When I turned Speed Test Bypass ON I got: (as expected)

So, CC is working - but overdoing it?
90.5% of 550 should be 497.75, and 85% of 23 should be 19.55

Note, that little to no traffic was happening during this test, network-wide.

So what you are wondering is why do the percentages not match to your actual speeds when doing the test with CC on and test bypass off?

Im actually testing mine now to see how close they are to the actual percentages once lowered..

Thanks!

Zippy.

[mindlash]

1 minute ago, Zippy said:

So what you are wondering is why do the percentages not match to your actual speeds when doing the test with CC on and test bypass off?

Originally it was to figure out why it wasn't working at all -- now that I've got it at least where CC is doing something... Yes, I'm trying to figure out why the numbers don't match as expected.  This started with working with Bufferbloat tests  

[Netduma Fraser]

If you check SmartBOOST when you do another test, is any other traffic being picked up at all?