cant get bt full fiber to work with router

[Dazz21kk]

Hi i have bt full fiber 900 with smart hub 2 but i cant get it to work with netduma r3 i have the ethernet cable from the hub to router  but i lose speed after a few hours

[Dean.L]

1 hour ago, Dazz21kk said:

Hi i have bt full fiber 900 with smart hub 2 but i cant get it to work with netduma r3 i have the ethernet cable from the hub to router  but i lose speed after a few hours

this sounds like it  might help have a look

try it out and let me know how u get on

https://thomascoward.co.uk/networks/using-bt-smart-hub-asus-rt-ac68u-router/#comment-788

[Netduma Fraser]

Have you entered the R3 in the DMZ on the Smart Hub? Are ALL devices connected to the R3? 

What does the speed reduce to, is this over WiFi, ethernet or both?

[Dazz21kk]

2 hours ago, Dean.L said:

this sounds like it  might help have a look

try it out and let me know how u get on

https://thomascoward.co.uk/networks/using-bt-smart-hub-asus-rt-ac68u-router/#comment-788

i just tried this and it seem to work over then my upload is to low i use to get 950 up and 110 down but know i get 930 up but only 55 down

[Dazz21kk]

[Dazz21kk]

i just tried this and it seem to work over then my upload is to low i use to get 950 up and 110 down but know i get 930 up but only 55 down

[Dazz21kk]

nope it gone back to beening low

[Dean.L]

1 hour ago, Dazz21kk said:

i just tried this and it seem to work over then my upload is to low i use to get 950 up and 110 down but know i get 930 up but only 55 down

Maybe try it with out step 2 and then restart it

?? whats the out come then

Step 2 Disable Firewall

1. While connect to the BT Smart Hub visit this address in your browser of choice: 192.168.2.1
2. Go to Advanced settings.
3. Go to Firewall.
4. Go to the Configuration tab.
5. Change firewall to Disabled.
6. Click save.
7. There is no need to restart.

[Netduma Fraser]

In addition to the above did you set the DMZ and are ALL devices connected to the R3?

[Dazz21kk]

31 minutes ago, Netduma Fraser said:

In addition to the above did you set the DMZ and are ALL devices connected to the R3?

yes sh2 is in dmz and only one ethernet cable going to the r3

[Netduma Fraser]

Does that mean you only have one device connected to the R3 with everything else using the SH2?

[Dazz21kk]

6 minutes ago, Netduma Fraser said:

Does that mean you only have one device connected to the R3 with everything else using the SH2?

no everything  connected to r3 and one from sh2 to the Internet port on r3

[Netduma Fraser]

Understood, when the speed drops do you notice any patterns e.g. after changing a setting, specific network usage etc?

[Zennon]

I have a SH2 and just got the R3 the other day and I am not seeing speed drops my set up.
Ethernet out of the SH2 > Into the blue WAN port of the R3
Duma in the SH2 DMZ
R3 DHCP on
Using the 192.168.77.* range in LAN
I then get a Duma WAN IP sent from the SH2 : 192.168.1*
Told the SH2 to set the Duma IP as a static.

I did try to set another way that I thought would be better but the above works out the best.
Been getting 1gb download speeds wired.
Giving the WiFi 5Ghz an 80Mhz band to get the full WiFi speeds.
 

[Dazz21kk]

31 minutes ago, Zennon said:

I have a SH2 and just got the R3 the other day and I am not seeing speed drops my set up.
Ethernet out of the SH2 > Into the blue WAN port of the R3
Duma in the SH2 DMZ
R3 DHCP on
Using the 192.168.77.* range in LAN
I then get a Duma WAN IP sent from the SH2 : 192.168.1*
Told the SH2 to set the Duma IP as a static.

I did try to set another way that I thought would be better but the above works out the best.
Been getting 1gb download speeds wired.
Giving the WiFi 5Ghz an 80Mhz band to get the full WiFi speeds.
 

any chance  you can send me pic of your setting and blank out your ip address 

[Zennon]

There is no IP address of any consequence here, so no need to blank all local.

[xNotTheBestJedi]

37 minutes ago, Zennon said:

I have a SH2 and just got the R3 the other day and I am not seeing speed drops my set up.
Ethernet out of the SH2 > Into the blue WAN port of the R3
Duma in the SH2 DMZ
R3 DHCP on
Using the 192.168.77.* range in LAN
I then get a Duma WAN IP sent from the SH2 : 192.168.1*
Told the SH2 to set the Duma IP as a static.

I did try to set another way that I thought would be better but the above works out the best.
Been getting 1gb download speeds wired.
Giving the WiFi 5Ghz an 80Mhz band to get the full WiFi speeds.
 

Just curious , was there an issue with using 160Mhz for the 5GHz WiFi? 

[Zennon]

1 minute ago, xNotTheBestJedi said:

Just curious , was there an issue with using 160Mhz for the 5GHz WiFi? 

No need to have it that wide as 80Mhz gives 1.2GB as is.

[Dazz21kk]

2 minutes ago, Zennon said:

No need to have it that wide as 80Mhz gives 1.2GB as is.

the static ip is that the ip of the sh2 or r3

[Zennon]

The SH2 handed that IP so I set it to static on the R3 and then the SH2 sees it as static

 

[Dazz21kk]

10 minutes ago, Zennon said:

The SH2 handed that IP so I set it to static on the R3 and then set it to static in the SH also.

is the gateway ip  the sh2 

[Zennon]

As seen in the photos above that's correct

[Dazz21kk]

when i set mine to static  i lose Internet 

[Dazz21kk]

okay static works but im getting 90 download  now lol

[Netduma Fraser]

You may have a faulty ethernet cable connecting the R3 to the Hub or the PC to the R3, if you swap them out does it keep the speed?