Max2110 Posted October 12, 2023 Share Posted October 12, 2023 Why am i only getting 160mbps from a 1gb fibre internet???? Theres always problems with this router. I upgraded to a 1gb fibre and I only get 160mbps. My setup is On my Huawei main router I get full 1gb speeds. I dmz the r2 to my main router. I enabled UPnP I even disabled all qos for testing on the r2 The device manager on the r2 picks up 1000 full duplex All Lan cables all pick up 1gb when I test it on the main router. The automatic speed test detects 150+- speeds and so does the benchmarks And yes they are all tested on Lan and wifi What else could be the problem. This is honestly frustrating Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted October 12, 2023 Administrators Share Posted October 12, 2023 Are ALL devices connected to the R2? Did you enter your new speeds into Bandwidth Settings? Link to comment Share on other sites More sharing options...
Max2110 Posted October 12, 2023 Author Share Posted October 12, 2023 yes, all devices are connected to the r2 and I even tried manually setting the speeds to 1000/1000 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted October 12, 2023 Administrators Share Posted October 12, 2023 What do you get from speedtest.net? Link to comment Share on other sites More sharing options...
Max2110 Posted October 12, 2023 Author Share Posted October 12, 2023 +-150 Link to comment Share on other sites More sharing options...
Max2110 Posted October 12, 2023 Author Share Posted October 12, 2023 39 minutes ago, Netduma Fraser said: What do you get from speedtest.net? I havent seen a fix for this from other posts Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted October 12, 2023 Administrators Share Posted October 12, 2023 Do you have the R2 in the DMZ on the Huawei? Link to comment Share on other sites More sharing options...
Max2110 Posted October 12, 2023 Author Share Posted October 12, 2023 37 minutes ago, Netduma Fraser said: Do you have the R2 in the DMZ on the Huawei? Yes Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted October 12, 2023 Administrators Share Posted October 12, 2023 May be worth doing a factory reset so it sets up again with the new speeds, might be holding on to the slower speeds for some reason Link to comment Share on other sites More sharing options...
Max2110 Posted October 18, 2023 Author Share Posted October 18, 2023 On 10/13/2023 at 4:20 AM, Netduma Fraser said: May be worth doing a factory reset so it sets up again with the new speeds, might be holding on to the slower speeds for some reason Is this normal for a 1000mb line? Should the full duplex be 100mb? Link to comment Share on other sites More sharing options...
Max2110 Posted October 18, 2023 Author Share Posted October 18, 2023 2 minutes ago, Max2110 said: Is this normal for a 1000mb line? Should the full duplex be 100mb? I'm going to try another cable Link to comment Share on other sites More sharing options...
Max2110 Posted October 18, 2023 Author Share Posted October 18, 2023 I changed the cable and it changed to 1000 but the speeds are still +-150 What speeds should i be getting on 5g wifi with only 1 device connected? Link to comment Share on other sites More sharing options...
Krush Posted October 18, 2023 Share Posted October 18, 2023 Hi ! Can you show us a speedtest behind your ISP router and a speedtest behind the R2 in RJ45? For information... You will never obtain speeds of more than 250/300 Mbps in wifi behind the R2 in the best conditions! ... In addition, it may also be due to the limitation of your wifi card (PC/phone)... Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted October 19, 2023 Administrators Share Posted October 19, 2023 Are you getting better speeds via ethernet now? As above for the WiFi speeds Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now