Administrators Netduma Fraser Posted June 28 Administrators Posted June 28 21 minutes ago, IITazII said: no How are you doing it, via the interface or the big physical button? I suspect it's losing power in that case if you're not unplugging it or factory resetting it from the pin or interface. Is it connected to an extender or direct to an outlet?
IITazII Posted June 28 Posted June 28 10 minutes ago, Netduma Fraser said: How are you doing it, via the interface or the big physical button? I suspect it's losing power in that case if you're not unplugging it or factory resetting it from the pin or interface. Is it connected to an extender or direct to an outlet? I tried both ways but it keeps resetting to factory settings. The problem is that it doesn't save the settings after starting the router.
Administrators Netduma Fraser Posted June 28 Administrators Posted June 28 1 hour ago, IITazII said: I tried both ways but it keeps resetting to factory settings. The problem is that it doesn't save the settings after starting the router. It must be losing power then during the reboot, I don't see any other reason why that would be happening, do you have it connected to an extender or direct to an outlet? Do you have another power adapter with similar voltage you can use to test?
IITazII Posted July 5 Posted July 5 On 6/25/2025 at 2:56 AM, PurpleHaze said: The chip is if anyone wants to know, at least on mine is a MXICx174514 30uf2618AC-XOI 8C374700 Its under the big heat sync on the bottom held in place by dimples, can be tricky to open. This requires a nand flash not SPI, so support may be limited, unfortunately you can (I don't think) get a flash clip onto it. Will require desoldering and flashing best done by a professional experienced micro solder. GPT says that using a CH341A SPI programmer could solve this problem. or is it already solved?
PurpleHaze Posted July 8 Posted July 8 On 7/5/2025 at 5:55 PM, IITazII said: GPT says that using a CH341A SPI programmer could solve this problem. or is it already solved? Hi thank you, I think it will need to be desoldered flashed and resolsdered. Managed to find another one second had. GPT is mighty helpful but you need to be careful with stuff like this as I believe that's incorrect. I dont believe the clip would get under the chip? I have a very similar soic 8 clip that I might test fit to compare. Thanks 😊
Suad Posted July 11 Posted July 11 Good news guys. All my DHCP issues were fixed since I installed official update V2.3.3.136. I have been using this firmware for 3 months, and I never encountered any issues. Netduma Fraser 1
L7NALMARI Posted October 6 Posted October 6 On 7/24/2023 at 8:46 PM, Netduma Fraser said: See if you can upgrade to this one: https://www.dropbox.com/s/mb7hztmwpxnpz2i/XR500-V2.3.2.134-dumaos33-rc10.img?dl=0 then upgrade to the beta
L7NALMARI Posted October 6 Posted October 6 What the last update for xr 500 ? i have now v2.3.2.134-dumaos33-tc14 @Netduma Fraser
Administrators Netduma Fraser Posted October 6 Administrators Posted October 6 9 hours ago, L7NALMARI said: What the last update for xr 500 ? i have now v2.3.2.134-dumaos33-tc14 @Netduma Fraser That is the latest from us yes and would advise you stay on that one instead of going to some of the more recent public versions - they don't have anything different
L7NALMARI Posted October 7 Posted October 7 11 hours ago, Netduma Fraser said: That is the latest from us yes and would advise you stay on that one instead of going to some of the more recent public versions - they don't have anything different Is this the most stable or should go older ?
Administrators Netduma Fraser Posted October 7 Administrators Posted October 7 12 hours ago, L7NALMARI said: Is this the most stable or should go older ? I'd suggest staying on this version yes, its the best in my opinion
AteBitWolf Posted October 8 Posted October 8 On 7/11/2025 at 8:38 PM, Suad said: Good news guys. All my DHCP issues were fixed since I installed official update V2.3.3.136. I have been using this firmware for 3 months, and I never encountered any issues. I should've stayed on that. The newest update V2.3.4.148 screws up DHCP again.
Yermaw2019 Posted Saturday at 08:11 PM Posted Saturday at 08:11 PM Hi so what is the current best firmware? i am curently running V2.3.3.136 on my xr500. i have been having problems with geo filter for a few months now. when i put my ps5 in filtered mode for battlefield it does not start any games when i turn it off it works fine. Not so much a problem with battlefield 2042 as i used portal and knew the ping was fine but on battlefield 6(beta) and full release geo filtering just does not work. When i use ping heatmap i can't check battlefield servers as battlefield does not show up at all on heatmap. When i do get in a game i like to see what servers i connecting to but it just says waiting on host and never tells me what server i am connected to. In the beta without filtering i was constantly getting put in american servers when im UK based. Any and all help appreciated.
Administrators Netduma Fraser Posted Sunday at 04:12 PM Administrators Posted Sunday at 04:12 PM On 10/11/2025 at 12:05 PM, kenji said: add me please It's in the first post of this topic. 19 hours ago, Yermaw2019 said: Hi so what is the current best firmware? i am curently running V2.3.3.136 on my xr500. i have been having problems with geo filter for a few months now. when i put my ps5 in filtered mode for battlefield it does not start any games when i turn it off it works fine. Not so much a problem with battlefield 2042 as i used portal and knew the ping was fine but on battlefield 6(beta) and full release geo filtering just does not work. When i use ping heatmap i can't check battlefield servers as battlefield does not show up at all on heatmap. When i do get in a game i like to see what servers i connecting to but it just says waiting on host and never tells me what server i am connected to. In the beta without filtering i was constantly getting put in american servers when im UK based. Any and all help appreciated. 'Best' is subjective, in terms of the latest version of DumaOS which is what I'd suggest then the version from this topic is what I'd recommend. We did add support for the game during the beta and we will make any necessary changes when we get to test the game more. What are your Geo-Filter settings? The biggest icon on the map will be your game server, do you see this when playing?
Yermaw2019 Posted 4 hours ago Posted 4 hours ago I have set 1250mile range on the geo filter so it covers where I would expect the severs to be as I can’t find them on heatmap. But as soon as I put the PS5 in filtered mode it just won’t connect to any matches starts the countdown and it stops after about 6-8 seconds and that’s it. Turn filtering off and I can connect but I am then at the mercy of being put on American servers like the beta. I’m not always have access to my pc when playing so I use the app and it always just says waiting on host even when in game and I have no icons on the geo filter map.
Administrators Netduma Fraser Posted 2 hours ago Administrators Posted 2 hours ago 1 hour ago, Yermaw2019 said: I have set 1250mile range on the geo filter so it covers where I would expect the severs to be as I can’t find them on heatmap. But as soon as I put the PS5 in filtered mode it just won’t connect to any matches starts the countdown and it stops after about 6-8 seconds and that’s it. Turn filtering off and I can connect but I am then at the mercy of being put on American servers like the beta. I’m not always have access to my pc when playing so I use the app and it always just says waiting on host even when in game and I have no icons on the geo filter map. Where is your location and radius covering? What do you mean you can't find the servers on Heatmap? If there aren't any on heatmap where you've set your radius then you will get that issue
Yermaw2019 Posted 2 hours ago Posted 2 hours ago 15 minutes ago, Netduma Fraser said: Where is your location and radius covering? What do you mean you can't find the servers on Heatmap? If there aren't any on heatmap where you've set your radius then you will get that issue My location is UK and my radius covers most of Europe. The reason I can’t find on heatmap is because there is no option for me to pick battlefield as the game it’s just not there. I’ll try get some pics for you.
Yermaw2019 Posted 2 hours ago Posted 2 hours ago 18 minutes ago, Netduma Fraser said: Where is your location and radius covering? What do you mean you can't find the servers on Heatmap? If there aren't any on heatmap where you've set your radius then you will get that issue My location is UK and my radius covers most of Europe. The reason I can’t find on heatmap is because there is no option for me to pick battlefield as the game it’s just not there. I’ll try get some pics for you.
Administrators Netduma Fraser Posted 1 hour ago Administrators Posted 1 hour ago 46 minutes ago, Yermaw2019 said: My location is UK and my radius covers most of Europe. The reason I can’t find on heatmap is because there is no option for me to pick battlefield as the game it’s just not there. I’ll try get some pics for you. Ah I see, it may be you need a cloud update on that platform, we will be doing so this week I believe but there will definitely be servers within that area you've selected. Do this: Quit the application/game/client completely Remove device from the Geo-Filter If you're on PC then give it the PlayStation Device Type in the Device Manager Resync from the Geo-Filter Map menu Re-add the device to the Geo-Filter Set up the Geo-Filter how you like Wait 2 minutes Boot up application/game/client
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now