H4bot Posted July 11, 2023 Posted July 11, 2023 Hi, I've set up the Hybrid VPN on my R2 (fw 3.3.280) with the open VPN configuration from my provider. However, when I choose to disable the VPN with the toggle my Config and User Name and Password are lost, so to re-enable I need to input all of these again. Is this normal or am I doing something incorrectly?
DARKNESS Posted July 11, 2023 Posted July 11, 2023 1 hour ago, H4bot said: Hi, I've set up the Hybrid VPN on my R2 (fw 3.3.280) with the open VPN configuration from my provider. However, when I choose to disable the VPN with the toggle my Config and User Name and Password are lost, so to re-enable I need to input all of these again. Is this normal or am I doing something incorrectly? No it all saved but if you reconfigure the vpn you will have to input all the information again
Administrators Netduma Fraser Posted July 11, 2023 Administrators Posted July 11, 2023 Hello, welcome to the forum! Basically as above you'll need to re-enter it, we're working on improving HybridVPN so you don't need to do that.
H4bot Posted July 11, 2023 Author Posted July 11, 2023 Hi, thank you for the replies. So if say I don't want to change the VPN config/location can I just toggle the VPN on and off as needed? Or would I need to copy the config and login credentials each time?
Administrators Netduma Fraser Posted July 11, 2023 Administrators Posted July 11, 2023 Yes you should be able to toggle on/off and the details you entered previously are saved.
H4bot Posted July 12, 2023 Author Posted July 12, 2023 Thanks for that toggling on/off seems to work fine once it's all configured, and my settings were retained.
Administrators Netduma Fraser Posted July 13, 2023 Administrators Posted July 13, 2023 Great to hear that, thanks for the update!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.