David824 Posted April 16, 2023 Share Posted April 16, 2023 I have noticed the last couple of weeks when I sign on to play COD on my PS5 I'm having a Nay type of Mod....then I look under UPNP and I'm seeing that the xr100 is picking up that I signed on to my PS5 with the port of 9303...but its not reading activisions 3074 like it suppose to do which explains why I'm getting the mod....any ideas? If I reboot my PS5 and boot COD back up its reading open but the router still never picks up the port under the UPNP section. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted April 16, 2023 Administrators Share Posted April 16, 2023 If it's reading open without that port showing then it probably is open but just not appearing and when it's showing moderate it's likely to be a misreading. I think there are some issues with UPnP showing the ports but it does seem to work in the backend, one for NG to take a look at. Link to comment Share on other sites More sharing options...
David824 Posted April 17, 2023 Author Share Posted April 17, 2023 By any chance Fraser do you know if NG knows about it and maybe looking into it? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted April 17, 2023 Administrators Share Posted April 17, 2023 1 hour ago, David824 said: By any chance Fraser do you know if NG knows about it and maybe looking into it? I'll have to check on that one and get back to you. David824 1 Link to comment Share on other sites More sharing options...
David824 Posted April 19, 2023 Author Share Posted April 19, 2023 Thought I would get back to you real quick Fraser....My XR1000 started acting strange so I just took it offline and ended up having to do 2 factory resets (after the 1st factory reset, it would load the dumaOS on any web broswer so I couldnt even set my router to do anything) so after the 2nd factory reset everything is ok now and all the ports are now reading in the UPNP slots like they are suppose to do. Thanks for the help though. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted April 20, 2023 Administrators Share Posted April 20, 2023 17 hours ago, David824 said: Thought I would get back to you real quick Fraser....My XR1000 started acting strange so I just took it offline and ended up having to do 2 factory resets (after the 1st factory reset, it would load the dumaOS on any web broswer so I couldnt even set my router to do anything) so after the 2nd factory reset everything is ok now and all the ports are now reading in the UPNP slots like they are suppose to do. Thanks for the help though. Ah that's good to hear, thank you for the update! Link to comment Share on other sites More sharing options...
David824 Posted June 7, 2023 Author Share Posted June 7, 2023 On 4/20/2023 at 10:26 AM, Netduma Fraser said: Ah that's good to hear, thank you for the update! Well Fraser...I came back to this thread because my XR1000 is starting to do the not 3074 reading on the UPNP table...and now every time I log its showing moderate and I'm having to reboot my router to get my games back to open NAT...and it still wont read on the UPNP table Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 8, 2023 Administrators Share Posted June 8, 2023 Could you change the UPnP option Advertisement Time to Live to 10, apply then reboot from the interface, wait 2 minutes then see if it is any better please? Link to comment Share on other sites More sharing options...
David824 Posted June 8, 2023 Author Share Posted June 8, 2023 Thanks for the reply back...I will save this and try it in a few days....what I did was downloaded back down to the 1.0.0.64 ...I had did the new firmware uo to the 1.0.0.68....now im not sure if thats what was causing it or not....I'l just getting online now to see what it does....unless you think I should do it even on the .64 verison? Link to comment Share on other sites More sharing options...
David824 Posted June 8, 2023 Author Share Posted June 8, 2023 ok so I signed on and the UPNP table still isnt reading my ports but my game is showing open and I didnt have to reboot it....I'm still curious as to why its no longer reading....could it be the game? its cold war mostly and I know its an older game but never had problems before. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 8, 2023 Administrators Share Posted June 8, 2023 I think the UPnP table has some trouble sometimes actually showing the ports but in the background it is actually opening the ones needed Link to comment Share on other sites More sharing options...
David824 Posted June 8, 2023 Author Share Posted June 8, 2023 5 minutes ago, Netduma Fraser said: I think the UPnP table has some trouble sometimes actually showing the ports but in the background it is actually opening the ones needed which im ok with it....hopefully it will get fixed and I know its not on your side thats a netgear thing but I was hoping maybe you guys may know something since its your software...the problem I was getting was the going moderate every time i logged in and was having to reboot the router and PS5...so since I'm on the .64 I'll just keep and eye on it for a few more days and if it keeps going I'll get back in touch with you if thats ok Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 8, 2023 Administrators Share Posted June 8, 2023 I suspect that could be due to leaving the console in a standby/instant on state if you do that, in which case if the console was shut down properly at the end of play it shouldn't happen again after you turn it on. Yes keep us posted! David824 1 Link to comment Share on other sites More sharing options...
David824 Posted June 17, 2023 Author Share Posted June 17, 2023 just getting back to you that after using my old R2 ...I put my xr1000 back online by it self with no AP router for my wifi and it was doing the same thing again with not reading ports (btw the R2 read ports to every game I played) but every time at night I would put my PS5 in rest mode after I closed cold war down I would log back on the game and it would read moderate because the ports weren't reading...however I reread this thread and changed the 4 in the UPNP live time up to 10 and so far its read open and the UPNP is reading the ports....I'm assuming that helped but so far so good...so as always Fraser...thanks a lot for the help and suggestions every time I need help!.. really appreciate it! Netduma Fraser 1 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 17, 2023 Administrators Share Posted June 17, 2023 That is really great to hear, thanks for the update! David824 1 Link to comment Share on other sites More sharing options...
David824 Posted June 21, 2023 Author Share Posted June 21, 2023 HAHA ok I lied.....I havent played for like two days...I guess something must have reset....because its back to doing it again....its still reads the port 9309 when the PS% boots up....but will not read 3074 going into COD and since its not reading its still giving me a moderate. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 22, 2023 Administrators Share Posted June 22, 2023 It'll be a false reading if you have an Open NAT on the console but if you reboot the console does it then work again? The setting I got you to change increases the time that it applies the port so it won't stay that way all the time unless you really increase the value but that could cause some slow downs Link to comment Share on other sites More sharing options...
David824 Posted June 22, 2023 Author Share Posted June 22, 2023 yeah I rebooted the router once and the game a few times and even the PS5 a few times and it just wont read the port...I finally had to leave the UPNP on and just went into the port forward and put in 3074 and its staying open. Its just strange the the XR1000 is only doing it...when I connect up my R2...it reads it every time.I would just keep the R2 inline for my pc and PS5 and AP my Xr1000 for all my echos and ring....but for some reason the R2 gave me such low bandwidth in the game I felt really behind...I could tell a difference between the 4k on the xr100 and the 200kbps ...could be placebo but I got much better kills under the Xr1000 with the normal kbps that it was giving me. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 22, 2023 Administrators Share Posted June 22, 2023 I know it does have a problem with showing the ports so it may be having trouble opening as well but port forwarding is a good work around. In theory the bandwidth doesn't matter as the game uses so little, even if it shows 4k it will never use that much. Have you tried the R2 with the game since trying Early Access? Link to comment Share on other sites More sharing options...
David824 Posted June 23, 2023 Author Share Posted June 23, 2023 8 hours ago, Netduma Fraser said: I know it does have a problem with showing the ports so it may be having trouble opening as well but port forwarding is a good work around. In theory the bandwidth doesn't matter as the game uses so little, even if it shows 4k it will never use that much. Have you tried the R2 with the game since trying Early Access? It’s been a while since I’ve used my R2 except the other day and the R2 was only giving me like 200kbps…so to be totally honest I don’t know anything about the early access? What is the early access? Just last night I went back to the R2 with my xr1000 in AP to see if the R2 would grab the ports (which it reads them fine so I know it’s the xr1000 not reading them) …what do I do to get the early access for the R2? by chance did you guys send out the get early access through email on here? If so that’s why I don’t note anything about it..the email I have registered on here with you guys I don’t have anymore …I have gmail…if there’s a link to get the access my new email is now [email protected] Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 23, 2023 Administrators Share Posted June 23, 2023 You have access already if you have a look and can be found here: https://forum.netduma.com/forum/144-netduma-r2-early-access/ no emails are sent for it, you'd just see the new section on the forum when you're approved. Upgrade to that and see if you notice an improvement with CoD. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now