Jump to content

netgear xr 1000


Recommended Posts

ok all i have a netgear xr1000 my open port will not stay open if i boot my pc or router..i tryed so far opening trigger ports ,forward ports dmz , upnp, sometimes when i reboot pc or router it opens then i restart pc back to moderate ,open static port also am i missing something...also when my nat type is moderate i get no servers in my geo filter, but if its open i get them all something weird is going on i think i tryed everything so far appreciate if u can see anything i miss in open type nat for my pc..thanx  right now on m ygeo filter im getting ping asist players thats it..

set distance is 500  ping assist 0

 

playing call of duty vanguard

Link to comment
Share on other sites

  • Administrators

Hey, welcome to the forum!

Having a moderate NAT type won't affect you being able to see the servers. I think part of the issue is you're trying so many different settings, put them all back to default and in WAN Settings set NAT to Open and that should do it.

Link to comment
Share on other sites

u mean in wan settings open up dmz? if so its open...so put everything back to default settings i have to erase...

also when its working right geofilter everytime u go into your geofilter u will see servers correct

Link to comment
Share on other sites

  • Administrators

In WAN Settings there is a NAT option which you can switch from Secured to Open, select open and don't use the DMZ. You don't have to do a factory reset just disable the port forwarding rules etc.

You will only see servers on the Geo-Filter when launching the game for the first time and when searching for a game and in game playing. 

Link to comment
Share on other sites

11 hours ago, BigMark said:

 

 so dont put a ip just click the open circle then apply im guessing...

 

should i leave upnp enable or disable

i tried what u said no luck

You can leave UPnP enabled, that's fine.

Could you also please test disabling filtering mode in Geo-filter? Once you've done that, boot up your game and check your NAT type with filtering mode still disabled.

Link to comment
Share on other sites

geofilter was working fine last night before i went to bed now i booted up pc no servers all im getting is ping assist players.... i disabled filtermode no dice just gettimg ping assist players no servers....this sounds weird when ever i get open nat type geofilter running smooth i get servers and everything ..on moderate i just get ping assist plsyers...or if i erase router then ill get servers also..still moderate 

Link to comment
Share on other sites

21 minutes ago, BigMark said:

geofilter was working fine last night before i went to bed now i booted up pc no servers all im getting is ping assist players.... i disabled filtermode no dice just gettimg ping assist players no servers....this sounds weird when ever i get open nat type geofilter running smooth i get servers and everything ..on moderate i just get ping assist plsyers...or if i erase router then ill get servers also..still moderate 

What's your exact physical setup? What's the make and model of your modem? Is your modem a router/modem combo or is it a pure modem? Are all devices on the network connected to the XR1000 or are some still connected to the modem?

Link to comment
Share on other sites

ii have vpn i try with it on and off same results...

 

update i open dmz rebooted modem also router and pc now its open im thinking its not gonna last

like i said once i reboot my pc back to moderate finger cross

disable filter mode still give sme moderate

Link to comment
Share on other sites

i was wrong my friend    UPDATEWhen using vpn it gives me moderate

when i disable vpn all servers are there ..also rebooted pc couple times still get open without using vpn hopefully its fixed so just wanna say ty and your time...

 

i also closed dzm but kept left option for open on

Link to comment
Share on other sites

15 minutes ago, BigMark said:

i was wrong my friend    UPDATEWhen using vpn it gives me moderate

when i disable vpn all servers are there ..also rebooted pc couple times still get open without using vpn hopefully its fixed so just wanna say ty and your time...

 

i also closed dzm but kept left option for open on

Ah OK - that makes sense! Let us know if you have any other questions!

Link to comment
Share on other sites

16 hours ago, BigMark said:

how do i find other games that ae not on ping filter like cold war or battlefield servers

are there any vpns that work  with geofilter that u know of

Cold War will work under the Call of Duty profile, Battlefield doesn't work with filtering mode unfortunately. 

If you got to Device Manager and click your PC, you can change it's device type to Playstation.

After this, remove it from Geo-filter and re-add it, this time selecting 'Choose manually' when asked to pick a service.

After that, most games you play will work in Geo-filter.

I don't have any recommendations myself for VPNs to use with Geo-filter. Routing game traffic through a VPN will add latency and may introduce other issues.

Link to comment
Share on other sites

  • Administrators
37 minutes ago, BigMark said:

im confused about how to get coldwar servers im new to this router is there a step by step or a youtube video floating around i search nothing....

This may help:

We also have optimal settings guides here: http://support.netduma.com/en/support/solutions/folders/16000090646

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...