Tonfaz Posted March 22, 2021 Posted March 22, 2021 Buona sera oggi mi è arrivato R2 sono riuscito a configurare tutto perfettamente ma non riesco ad avere Nat aperto su warzone.
Administrators Netduma Fraser Posted March 22, 2021 Administrators Posted March 22, 2021 Ciao, benvenuto nel forum! Su quale piattaforma stai giocando? Qual è il modello del modem / router a cui è connesso R2?
Tonfaz Posted March 22, 2021 Author Posted March 22, 2021 Buona sera Fraser complimenti per tutto prima di ogni altra cosa. Sto giocando da ps5 il modem router è il fastgate.
Tonfaz Posted March 22, 2021 Author Posted March 22, 2021 Ti spiego cosa ho fatto. Dmz ISP R2 eseguito/dmz R2 ps5 eseguito/upnp attivo infatti appena accendo ps5 ed entro su Cod mi spuntano le voci del associazione. Provato a disattivare filtro geografico ma niente sempre Nat moderato.
Tonfaz Posted March 23, 2021 Author Posted March 23, 2021 Ancora non sono riuscito a risolvere purtroppo.
Tonfaz Posted March 23, 2021 Author Posted March 23, 2021 Ho provato anche ad aprire manualmente le porte per risolvere il problema del Nat moderato su warzone ma non mi permette di aprirle per un errore quando vado a salvare la porta
Netduma Liam Posted March 23, 2021 Posted March 23, 2021 I'd suggest the following: Make sure the R2s WAN IP is in the modem's DMZ Set a static IP for the R2 in the Modem's interface Remove the PS5 from the R2s DMZ Remove any port forwarding rules you may have Sometimes when you add all these things together, you actually end up doing more harm than good for your NAT type. Test with the above recommendations and let us know how you get on
Tonfaz Posted March 23, 2021 Author Posted March 23, 2021 Ehi ciao grazie per la risposta. Upnp lo lascio attivo ? Tolgo ip statico alla play e su dhcp R2?
Administrators Netduma Fraser Posted March 23, 2021 Administrators Posted March 23, 2021 Puoi lasciare UPnP abilitato. Scusa rimuovere l'IP statico su cosa? Lascia il DHCP abilitato su R2.
Tonfaz Posted March 23, 2021 Author Posted March 23, 2021 21 hours ago, Tonfaz said: Ho impostato un ip statico sulla ps5.
Tonfaz Posted March 23, 2021 Author Posted March 23, 2021 Ragazzi non so cosa sia successo non riesco più ad accedere al R2 e cosa peggiore non riesco a formattare il tutto. Aiuto
Administrators Netduma Fraser Posted March 23, 2021 Administrators Posted March 23, 2021 Puoi mantenere l'IP statico sulla console, ma ti consigliamo di impostarlo sull'interfaccia. Hai modificato un'opzione prima di non essere in grado di accedervi? In tal caso, disabilitava il DHCP?
Tonfaz Posted March 23, 2021 Author Posted March 23, 2021 Si avrò toccato qualcosa che non andava toccato ma non so cosa.non riesco più ad accedere al R2. Aiuto
Tonfaz Posted March 23, 2021 Author Posted March 23, 2021 Non so nemache se sono riuscito a ressatare R2
Tonfaz Posted March 23, 2021 Author Posted March 23, 2021 Con lan da R2 riesco ad avere internet ed entrare nella gestione modem ISP ma non riesco ad entrare su quello del R2. Aiuto
Administrators Netduma Fraser Posted March 23, 2021 Administrators Posted March 23, 2021 Tenere premuto il pulsante di ripristino sul retro di R2 per 30 secondi, quindi rilasciarlo, attendere 2 minuti e accedere nuovamente all'interfaccia.
Tonfaz Posted March 23, 2021 Author Posted March 23, 2021 Deve esserci internet per accedere ad R2 gestione ?
Tonfaz Posted March 23, 2021 Author Posted March 23, 2021 R2 può restare collegato ad ISP? Non mi fa accedere le ho provate tutte.
Administrators Netduma Fraser Posted March 23, 2021 Administrators Posted March 23, 2021 No, non hai bisogno di Internet per accedere all'interfaccia. Scollegare il cavo Internet che collega R2 al modem. Completa il ripristino, puoi accedere all'interfaccia R2 quindi?
Tonfaz Posted March 23, 2021 Author Posted March 23, 2021 Risolto. Formattato ISP ed R2. Attivato geofilter,attivato qos. Adesso ho Nat aperto su warzone. Adesso mi chiedo conviene inserire su dhcp un ip statico alla ps5 ed attivare dmz R2 su console ? Cosa otterrei con dmz? Grazie mille per il supporto ragazzi ,ero entrato nel panico.
Tonfaz Posted March 23, 2021 Author Posted March 23, 2021 E se in tal caso attivo dmz devo disattivare upnp?
Administrators Netduma Fraser Posted March 23, 2021 Administrators Posted March 23, 2021 Grande! Metti l'IP statico / riservato su R2 nelle impostazioni DHCP. Non è necessario utilizzare DMZ se si dispone di un NAT aperto: è possibile mantenere attivo UPnP se si utilizza DMZ.
Tonfaz Posted March 23, 2021 Author Posted March 23, 2021 Mettendo ip statico da dhcp su R2 devo andare anche a dare ip statico alla ps5?
Administrators Netduma Fraser Posted March 23, 2021 Administrators Posted March 23, 2021 Basta inserirlo nelle impostazioni DHCP, non è necessario farlo nelle impostazioni PS5
Recommended Posts
Archived
This topic is now archived and is closed to further replies.