Jump to content
Reminder, starting today you will no longer be able to login to the forum using your display name, to login you must now use your email address. ×

IPTV problem with XR1000


Recommended Posts

Hi, 

I had XR500 before, it was working perfectly with IPTV with VLAN bridge. Now I bought the XR1000, and it is a nice router, but the IPTV doesn't work properly. I activated the VLAN bridge, but still the channels shuttering and not working properly. I tested it on another router with mode bridge, it works perfectly. I rested the XR1000 multiple times, and the same problem exists.

Link to comment
Share on other sites

15 hours ago, Netduma Fraser said:

Are there any settings you changed specifically on the XR500 that you have yet to put in the XR1000 or are you using the exact same settings?

No. they are the same I do only the bridging on one lan port. I tested all ports they are suffering from the same problem

Link to comment
Share on other sites

  • 2 weeks later...
  • Administrators

I've received a response from Netgear, could you try this please?

  1. Enable VLAN/Bridge Setup in "VLAN/Bridge Settings" page.
  2. Select "By bridge group" and then select "Port4"
  3. Apply. Wait 2 minutes until GUI back.
  4. Connect IPTV to LAN port 4 ( near USB ). It is bridge mode. IPTV will get IP from WAN side DHCP server.
  5. See if this IPTV can access the internet without any issues.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...