Netduma R1 Bridge mode

[harrybarracuda]

Is it possible to put the R1 into Bridge Mode?

I have a corporate network segment 10.130.4.x.

 

I have given the R1 the WAN address of 10.130.4.101 which has Internet access through a connected Firewall.

It works fine, but it's giving addresses in the range 192.168.88.x.

 

I want the R1 to distribute DHCP addresses in the range 10.130.4.102 to 106 (only wired).

 

Is this possible?

[BIG__DOG]

you need to change ip addresses in LAN. I changed mine from 192.168.88.1 to 99.1 as an example for you. When you have done this you will have to reboot the router. Also you will need to reboot devices so they get the new dhcp addresses from the netduma.

 

 

Please note that  it cannot use 10.130.4.102. it must use 192.168.xx.1

 

 

 

[Netduma Fraser]

As Big Dog has said, it's not possible to use the range that you're wanting at the moment. Once DumaOS arrives in April for the R1 you should be able to have that functionality. 

Also I've moved your post to General Support.

[harrybarracuda]

As Big Dog has said, it's not possible to use the range that you're wanting at the moment. Once DumaOS arrives in April for the R1 you should be able to have that functionality. 

 

Also I've moved your post to General Support.

OK thanks gents.

 

I can wait.