Jump to content

geo filter


Recommended Posts

Posted

hey there i started gaming again back this year and using my netduma but now i am ising a ps4 and a wireless connection but the geo filter isnt picking up any red dots nor my own location just curious whats happening or what i can do?

Posted

Hi,

Are you sure you have the geo filter enabled on the host filter page and the PS4 on your device manager page and the PlayStation Network ticked. Unless the host filtering is selected the Netduma won't show any hosts.

Hope that helps you sort it :)

  • Administrators
Posted

If you had it previously connected via ethernet it will appear as another PS4 when connected via WiFi so double check the IP in device manager with the IP on the console to make sure you've selected the right one

Posted

i was hard wired before and i had the wrong Ip in the geo filter thanks guys for all your help,its all fixed now 

Posted

i was hard wired before and i had the wrong Ip in the geo filter thanks guys for all your help,its all fixed now

Make sure you swap your device priority, hyper lane or port forwarding settings for that WiFi IP too!

  • 1 month later...
Posted

i was hard wired before and i had the wrong Ip in the geo filter thanks guys for all your help,its all fixed now 

It will be easier to configure the settings if you use this guide http://192-168-1-1.one . There are many different IP addresses and to find which one is yours, simply turn the router upside down and it's  located on the bottom, there you will find a sticker with an IP address.It must work to continue the configuration of your IP address.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...