tellto Posted June 24, 2016 Share Posted June 24, 2016 hey guys i cant access the control panel for the duma. First, I put my LAN cable from my duma to my mac and typed in 192.168.88.1 and it didnt work. its weird because it worked all the time before this. so then, i connected to the duma wifi and tried that. that didnt work. then, on my mac i went into system preferences and looked at what the assigned ip was for the duma on wifi. it was 192.168.0.2. i typed that in, even that didnt work. i did the same when i connected into LAN. i even tried https://r1and that didnt work, and i tried factory reset. plz help Link to comment Share on other sites More sharing options...
ColonicBoom Posted June 24, 2016 Share Posted June 24, 2016 Turn everything off for 10 mins, then turn the devices on in stages, isp hub first give it long enough to boot up fully, then the Netduma, then your laptop. Then try to set it up as per the wiki from scratch. Link to comment Share on other sites More sharing options...
tellto Posted June 24, 2016 Author Share Posted June 24, 2016 Turn everything off for 10 mins, then turn the devices on in stages, isp hub first give it long enough to boot up fully, then the Netduma, then your laptop. Then try to set it up as per the wiki from scratch. my setup is modem>duma(wifi off)>nighthawk(AP mode) so what should i do Link to comment Share on other sites More sharing options...
ColonicBoom Posted June 24, 2016 Share Posted June 24, 2016 If you don't know what you changed that messed everything up you'll have to start from the beginning. Take the nighthawk out of the loop until everything else is working. Connect the Duma to the modem and follow the wiki setup. Once the duma is set up you can connect the nighthawk and put it into AP mode Link to comment Share on other sites More sharing options...
tellto Posted June 24, 2016 Author Share Posted June 24, 2016 If you don't know what you changed that messed everything up you'll have to start from the beginning. Take the nighthawk out of the loop until everything else is working. Connect the Duma to the modem and follow the wiki setup. Once the duma is set up you can connect the nighthawk and put it into AP mode should i put my duma into factory reset before restarting it or should i just unplug it and the modem and the nighthawk for 10 mins? Link to comment Share on other sites More sharing options...
ColonicBoom Posted June 24, 2016 Share Posted June 24, 2016 should i put my duma into factory reset before restarting it or should i just unplug it and the modem and the nighthawk for 10 mins? Don't factory reset unless it's your last resort really (especially when considering the button on the back). Just give it all a switch off and connect modem > duma > laptop. turn them on one at a time (in that order) with a 5 minute gap and then hopefully you'll be able to get into the Duma interface. Once we get there then it should be easy to get the Nighthawk back in the loop. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 25, 2016 Administrators Share Posted June 25, 2016 Can you follow this guide and see if you're able to access the interface please http://wiki.netduma.com/doku.php?id=unbrick_router Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.