TheGreenOne Posted January 31, 2016 Posted January 31, 2016 What can i do it is on limited network,i. Have tried clone mac and typed 35
Zennon Posted January 31, 2016 Posted January 31, 2016 Make sure the IP is set to auto in both your ISP router and the Netduma. Turn off both routers. Turn on the ISP router wait 1 min to turn on the Netduma wait 1 min and retest.
PharmDawgg Posted February 1, 2016 Posted February 1, 2016 Click on settings>click WAN>WAN IP select static disabled (auto is enabled)
TheGreenOne Posted February 1, 2016 Author Posted February 1, 2016 Now i can not Even connect to the Netduma,only with cable
Netduma Staff Netduma Crossy Posted February 1, 2016 Netduma Staff Posted February 1, 2016 Remove cloning and VLAN tag WAN IP should be disabled (so it is set to automatic). The easiest way to setup the Netduma would be to connect it to the router that you were using before you got the Netduma.
torchstang Posted February 2, 2016 Posted February 2, 2016 i had no internet connection and used differant cable than what it came with and it worked. thanks for the broken cable
Recommended Posts
Archived
This topic is now archived and is closed to further replies.