
pdoidy30
XR1000 Beta Testers-
Posts
25 -
Joined
-
Last visited
Everything posted by pdoidy30
-
I don’t have a ISP modem / router. I used a Linksys AC3200 and the X1000 to the handle the PPPoE and then connect the R3 to that. The latency spiked and speeds dropped to sub 200mbs on WiFi. On the Speedtest on R3, speeds were in the 800/900 range. Suggestions? Also since using the R3, latency on certain application e.g. Citrix Workspace has increased. How to fix this?
-
Okay so what is the best way to fix this ? What’s your setup suggestion and key steps?
-
Any updates on when you R3 would be able to support higher speed on PPPoE?
-
Thanks. I have the 2.4/5GHz split with different names and everything. Ethernet test on the router is around 450/460mbps but on the XR1000 is was 950/980mbps.
-
I just swapped my XR1000 for the R3 Router and the speed has dropped from the Almost 750-800mbps on Wifi to 350mbps. Attached is the latest screenshot from bufferbloat. The router went through an upgrade to the latest firmware when i was first setting it up. Additionally, connection is based in PPoE and internet plan is a1GB Fibre plan. Any suggestions on getting this fixed ?
-
Thanks. So I got it to work and hope it stays this way. Solution was to do factory reset and setup as a new router.
-
Console is connected via an bridge that is connected directly to the router. No issues with the bridge i presume, but let me know your recommendations.
-
See attached. It was working fine all the way from WZ1 to the about the Jan this year. I get that you’re trying to ping the closest server or reduce ping but one of the elements of trying to play in OZ is a limited player base so it gets pinged to the US in most case but pushes to the EC where ping is north of 290. If I push to OZ servers only, it takes forever to find a game.
-
I haven't been able to connect to non-local servers outside of AU using Geo Filter for several months now. I've tried the standard "Remove Device from GeoFilter" and hard reset etc. etc. I can see the servers e.g. in the US, but the it only connects to the local servers. Is there a work around to get this fixed?