euphidra

@Netduma Fraser @Netduma Alex I reset the firmware 4.0.41 and upnp opens all ports except TCP 3478 to 3480 and UDP 3478 to 3479 (Playstation Network ports). So I disabled upnp and opened all the ports that upnp opened plus these ports. If you use port forwarding you need to disable UPNP or both can be enabled. UPNP and DMZ together. UPNP and port forwarding together. Or do they conflict? This firmware is not very stable with Pingplotter with ping fluctuations. If I connect only the Tim Hub Plus Technicolor modem, Pingplotter gives a linear graph without ping fluctuations. Last thing with the VPN that will arrive having moderate Nat (Nat 2) does not affect the playability but it will certainly be better than Netduma R2. It is important that you indicate the ping from the point you are connecting to and not from your location as without a VPN. Thanks Fraser. Forwarding Ports for eFootball on Your Router. (portforward.com) Opening Ports for PlayStation Network using Your Router (portforward.com)

@Netduma Fraser Yes. Hi Netduma, stabilize the ping which with pingplotter is more stable with just the modem without router. The CPU graph still peaks at 100%. Solve upnp and PPPOE with TIM (TELECOM) network. Improve smartboost, steadyping, ping optimizer (bufferbloat A+ and it gives me triangles on low latency while on Netduma R2 I had green ticks) and update the eFootball 2024 servers, there are others that the heatmap doesn't detect in the ping but you can do it see them when you watch enters the game and you can ping them. At startup the router does not remember the ping optimization mode on Expert and the speed test bypass is always active.

@Netduma Fraser Yes. Hi Netduma, stabilize the ping which with pingplotter is more stable with just the modem without router. The CPU graph still peaks at 100%. Solve upnp and PPPOE with TIM (TELECOM) network. Improve smartboost, steadyping, ping optimizer (bufferbloat A+ and it gives me triangles on low latency while on Netduma R2 I had green ticks) and update the eFootball 2024 servers, there are others that the heatmap doesn't detect in the ping but you can do it see them when you watch enters the game and you can ping them. At startup the router does not remember the ping optimization mode on Expert and the speed test bypass is always active.

@Netduma Fraser Netgear XR1000 completely disabled all settings when turned off. So the problem is with the Netduma R3. A firmware tested already at launch was supposed to be released. Instead we are testers of a product that still works poorly.

@Netduma Fraser Yes. I turn it off at night using the router's on/off button because I don't want the wifi turned on. A wifi button was needed on the router like on the Netgear XR1000.

@Netduma Fraser@Netduma Alex Hi Netduma, when a new firmware version arrives(could you send it to me) with hybrid vpn beyond version 4.0.41 which is not a perfect perfect firmware(4.0.23 also had bugs). Stabilize the ping which with pingplotter is more stable with just the modem without the router. CPU graph still peaks at 100%. Solve upnp and PPPOE with the TIM (TELECOM) network. Improve smartboost, steadyping, ping optimizer (bufferbloat A+ and it gives me the triangles on low latency while on Netduma R2 I had green ticks) and update the eFootball 2024 servers, there are others that the heatmap doesn't detect in ping but you can see them when you look enter the game and you can ping them. When the router starts it never stores the dark background screen but always the white one (which is actually very annoying to use even during the day). Use another color instead of white. When the router starts it does not store pings optimiser mode on expert and speed test bypass is always active.

@Netduma Fraser Without putting MTU on the router the pingplotter test with slight ping changes in PPPOE is better. If I set MTU 1492 (1464+28) I have greater ping fluctuations in PPPOE. Only with the modem is the ping on pinglotter stable without fluctuations. Do you have new firmware beyond 4.0.41 to send me. Thank you.

@Netduma Fraser @Netduma Alex This firmware 4.0.41 using pppoe with pingplotter increases my ping by 4ms compared to doing the test with the modem alone (where the line is more stable without changes compared to having Netduma R3 in cascade). I have a TIM FTTC 200 mega line with the Tim Hub Plus Technicolor modem. To improve smartboost. If I put efootball as priority the upload does not perform in the download comparison test. In fact, with smartboost deactivated the Playstation 5 improves in game. I hope you fix this problem in PPPOE.

Io ho anche Netduma R2.

@Netduma Fraser @Netduma Alex This firmware 4.0.41 using pppoe with pingplotter increases my ping by 4ms compared to doing the test with the modem alone (where the line is more stable without changes compared to having Netduma R3 in cascade). I have a TIM FTTC 200 mega line with the Tim Hub Plus Technicolor modem. To improve smartboost. If I put efootball as priority the upload does not perform in the download comparison test. In fact, with smartboost deactivated the Playstation 5 improves in game. I hope you fix this problem in PPPOE.

@Netduma Fraser @Netduma Alex This firmware 4.0.41 using pppoe with pingplotter increases my ping by 4ms compared to doing the test with the modem alone (where the line is more stable without changes compared to having Netduma R3 in cascade). I have a TIM FTTC 200 mega line with the Tim Hub Plus Technicolor modem. To improve smartboost. If I put efootball as priority the upload does not perform in the download comparison test. In fact, with smartboost deactivated the Playstation 5 improves in game. I hope you fix this problem in PPPOE.

@Netduma Fraser I went back to 4.0.41. I downgraded to 4.0.16. It automatically updated to 4.0.23. Then manually update to 4.0.41(I skipped 4.0.40). Upnp from nat moderated and I put in dmz without upnp. If you have a correct firmware send it to me and that it has the vpn. Thank you.

@Netduma Alex @Netduma Fraser This firmware 4.0.41 is truly awful. Neither pppoe nor dhcp works. All players stopped in efootball. This Netduma R3 has too many problems. Router for FTTH non-FTTC lines. Upnp no longer works. Dmz ditto. Port forwarding useless. I'm going back to firmware version 4.0.23 I'm tired of not being able to play a decent game in this Efootball.

Cmq è ingiocabile questo gioco eFootball. Torno alla 4.0.23. Firmware che hanno sempre problemi.

Non si fa cosi. Fraser scrive cosi ad esempio: Source start 3074 Source end 3074 Destination start 1024 Destination end 65535 TCP/UDP

@Netduma Fraser Geo filter is on hexagon on efootball 2024 servers. Congestion control is 70% download and upload. Smartboost active on efootball in activity and PS5 on devices. As a second priority in business I have video and streaming, as a third Livestream, as a fourth Social Media. After installing version 4.0.41 from version 4.0.40 I did not reset. On pingplotter I have a slight change in ping. This is the graph in the car and bypass speed test deactivated: https://www.waveform.com/tools/bufferbloat?test-id=1d0adf22-87c9-42f7-9138-5088f7e0cfce

@Netduma Fraser Even with steady ping deactivated and dmz active, efootball is played very badly. Indecent to play this game. The line is stable but something is wrong with this netduma R3 router. I use PPPOE but it's really bad to watch an opponent and see rebounds and players who don't run as if they're blocked. This router doesn't work well in my opinion.

@Netduma Fraser We'll be working on UPnP. Weighing down in what way? Having with steady ping, a ping of 49ms I would prefer to deactivate it. Delayed commands which didn't happen with the previous firmware. I use FTTC Tim in PPPOE.

@Netduma Fraser I removed upnp and put dmz and I opened nat. Upnp and dmz together also from open nat but I don't want to cause conflict. Only upnp from nat moderated and not open like on firmware 4.0.40

Yes.

@Netduma Fraser The game on efootball 2024 is bad. Upnp does not work well compared to previous firmware versions. Steady ping weighs down too much in the game on Fttc Tim (PPPOE).

@Netduma Fraser @Netduma Alex I disabled adblocker since it doesn't block anything like YouTube advertising from the default list or if you add lists manually. Browser adblockers work better than Netduma R3's adblocker.

@Netduma Fraser Your lists do not block YouTube advertising on smart TVs. Do I need to restart the router after adding the list? Or just deactivate and reactivate the device in adblocker? Https doesn't read the list while if I use http it stores the list. Is it a bug?

@Netduma Fraser Which list blocks YouTube advertising on smart TV? GitHub - hagezi/dns-blocklists: DNS-Blocklists: For a better internet - keep the internet clean!

@Netduma Fraser Smartphone problem solved. I had the old Galaxy S21FE offline with the same IP in adblocker and devices. Removed via Duma OS app. Incredible.