tduma

my Nano Pi r4s With everything activated cake vpn brands dscp manages 1 gb I don't know if the R3 will reach those speeds, although above it answered me that they are still correcting ppoe and IPv6 errors so I will wait and keep open wrt

Não há jogos que precisem de opções específicas, mas você poderá selecionar o jogo para filtrar/priorizar
Yes it will work with PPPoE though the speeds may be limited to around 300Mbps. We think we can improve on this but it won't be in time for the launch. If you use a VPN you'll be limited to whatever can be done through it, theoretically should be the max speed that the encryption protocol can do (we don't have a figure for that at the moment). Without all that and with QoS you should see near gigabit. 
Yes Wireguard can be used

I had this issue with a tp link. Something to do with the slow cpu not handling everything and yes with qos on dropped half my speed was a joke. How companies get away with that is insane but homework seems to be the key these days as buisness is buisness and no body tells you the facts

I'll let ya know how it goes within the hour....cheers 👍

Unplug the R2 from power, wait for 10 seconds, hold the Factory Reset button, while continuing to hold plug the power back into the R2 and keep holding the reset for 30 seconds then release. Wait 2 minutes, then try accessing please and see if you can go through the setup wizard. Then if you can get back on I'd suggest trying the Early Access version to see if that is more stable for you.

Can't you just flash the firmware using tftp?

There hasn't been an update since the last security update so no not yet.

Are you connected to the R2 directly when you're trying to access or are you connected to the other router? As you can only access when connected direct to the R2.

Ok sound!!! I'll try that...thanks again

That's what we're doing, it's not just a case of giving you the same file due to the aforementioned hardware change.
It's negligible, the hardware affected is now replaced with an equivalent as far as I'm aware.

Any idea? The progress tracker now says currently testing a new build (rather than NG testing) but the build version hasn't changed? Has the flagship router fallen further behind?

We're back at it in full force now, we're hoping to get some firmware out as soon as possible, once I have a clearer idea I'll let you know

Sign up for Early Access: https://forum.netduma.com/topic/39415-introducing-early-access/ and once approved you can try any firmware that may be posted there 
 

There isn't a version for the 1000 that I can currently provide, once the team are all back in the new year it won't be too long before a version is available. 

As far as I am aware yes it should be working for PPPoE, I'll need to see where the team are at when they're back

Hate to be negative here but I would be shocked if the sliders QOS will ever work with ppoe or ipv6. 
Google it, even since the OG netduma came out they had issues with it not working with ppoe or ipv6. 
I have a ppoe connection as well but I kind of gave up hope on it ever working. There are  plus two year old posts about this with it supposed to being fixed soon but here we are 2 years later. 

It's entirely dependent on how long their testing process takes, I couldn't say, in the meantime I would recommend you have your ISP router handle PPPoE so QoS can work correctly on the router. When you get a disconnect grab the log from the System Information page and post it here please.