Mehmet

This is what it looks like in bridge mode right now. I don't know if I need to do anything else. @Netduma Fraser

I did as you said and hard reset the modem. I put the modem back into bridge mode and didn't touch anything inside it, I left it on as you can see in the pictures. I'm leaving it like this, right?

My connection is as down the picture @Netduma Fraser. I switched the modem to bridge mode. I entered the username and password into the R3 PPPoE. I disabled DHCP on the modem, but I manually entered the R3's MAC address and IP address. UPNP and firewalls are also disabled on the modem. Am I doing anything wrong?

Hi @Netduma Fraser When I first disabled UPNP and DHCP on the modem, I got an error in bridge mode. This time, I did it like this and there's no problem. The R3 is working fine now.

Yes, I'm using an ONT modem. I cloned R3's MAC address from the modem's DHCP and wrote it down. I disabled DHCP and UPNP on the ONT modem. Everything is now handled by R3.

Should I turn off UPNP on the modem?

No, DHCP and UPNP are enabled on the modem. They are already enabled on the R3. I have problems when I disable them on the modem.

Yes, the modem is in bridge mode. But when I previously disabled UPNP and DHCP, I experienced disconnections on R3. So I left it enabled. Yes, the connection is like this: modem - R3 - Xbox. What should I write about DNS?

And I didn't turn off DHCP and UPNP on the modem. Will there be a problem because when I turned it off before, R3 had disconnections.

I didn't enter DNS but no problems occurred. By the way, the default DNS of my modem was 192.168.1.1. What should I enter as my DNS if I don't want to use Google or Cloud DNS?

And one more thing, as a moderator, your first job is to write in a language that everyone can understand, and that's English, right? If you don't know, I suppose you can use a translation program???

What is impossible ??? İts set to bridge mode man

Hi Frazer. I set my R3 router to bridge mode. It worked fine for two days, then I lost connection and turned the modem off and on. Even though bridge mode was enabled, I still couldn't connect to the R3. I reset both the modem and the router to factory settings, then set them to bridge mode again, but even after entering my account name and password, the router still won't connect. Any help would be appreciated. One more thing. Should I disable the DHCP and uPnP settings on the modem when I switch it to bridge mode?

Ok Frazer. Do I need to disable UPNP, DHCP, WiFi and firewalls on the modem?

Hi everyone. My modem doesn't have bridge mode. What should I do to make the router work better instead?

Hello Duma family. I upgraded to new internet today and bought a new modem. Everything is fine. I added the router to the modem's DMZ. However, when I perform ping optimization, it says your ping could not be fixed. Also, while the geofilter stabilizes the ping, it doesn't display the server ping simultaneously. What's stopping this? I'd appreciate any help.

Hi Frazer. When I enable the geofilter on my R3, the Xbox NAT type isn't detected. When it does, the game feels bad, even with low ping and excellent stable ping. When I disable the geofilter, this problem disappears. How can I fix this?

Thank you guys. And one more i’ve XR300 so will you do a new firmware for it ?

Hi guyz. Can i use R3 as modem ??

Thank you Fraser 👍

Hi guys. Does Nighthawk X4S AC2600 support dumaos ??

okay so there is a problem. I did what you write to me. But i change the device type from device manager to consol than i added the geo filter and it works so i think system cant see the pc Fraser

It is same Fraser

Fraser hi again i tried all games on the geo filter list but it doesnt work again. Nothing flashing on geo filter screen

yes i play OW. i'll try with other games Faser