Needing some help with the r3 router

[blue water]

I'm running into some issues with the netduma router basically what's happening is the netduma is blocking a server that is inside of the radias I don't understand what's going on I have tried to factory reset it seems to not help the issue also after I do the factory reset and I get to the setup screen it will freeze on the screen that shows the continue button I then will have to unplug my isp router and plug it back in order to get past the continue screen for the setup 

[Netduma Fraser]

So after a reset what Geo-Filter settings are you changing immediately? Can you provide a screenshot of the Geo-Filter page showing what you see when it happens please?

[blue water]

So usually I will turn gio latency off then I will set congestion control to always on but for some reason if I move the gio radias at all the router will start blocking servers inside of radias also if I turn on ping assist the router will also block servers inside of radias 

[blue water]

I ended up fixing the issue basically what was causing the problem was congestion control being alwasy on I turned it to auto and things are working like normal 

[Netduma Fraser]

That doesn't make any sense they're two independent features - if you could provide a video reproducing the issue and showing you fixing it that would be really helpful but no worries if not

[blue water]

I'm as confused as u are on this I don't know if the router was malfunctioning or what but for some reason on the congestion control on the advanced setting u can choose low latency only or auto or always on when I would set it to alwasy on it would cause some of the servers inside of the radias to be blocked I then did a factory reset and  left congestion control on auto and it for some reason stopped the servers from being blocked