Just got full fibre howe do I fix this.

[COD WARFARE]

Speed test in my main router.

Speed test on R3

Speed Test With R3 on okala 

 

 

I know my cables will effect the speed but this is some drop off.

 

[Krush]

Ton câble doit être cassé, il est réduit au fast ethernet soit 100mbps max UL/DL.

Essayes avec un autre câble !

[Netduma Fraser]

As above, 100Mbps is a hard limit on some ethernet cables so it's possible your one is faulty or you need an ethernet cable that supports 1000Mbps - Cat5e or higher. If you replace the cable connecting the router to the ISP router/modem do you then get faster speeds?

[COD WARFARE]

I've taken out a hub that was 10/100 and put two, gbp cables in, but only getting 250mb max at pc and xbox, thats behind the netduma.

Will do some more cable investigating tomorrow.

Cable from the wall socket to the router is CAT5E and replaced it with another and it makes no difference.

 

 

 

 

[Netduma Fraser]

Okay great, it's unlikely to be a cable now. How have you set your ISP router to ensure all traffic flows to the R3? E.g R3 in its DMZ, modem/bridge mode. Are ALL devices connected to the R3?

[COD WARFARE]

R3 is in DMZ on other router or I'll get double nat.

No not every thing is behind the R3, but I guess that could explain it. 

Long story why every thing isn't behind,

 

 

[Netduma Fraser]

It could be it, if it's not possible then briefly as a test, remove everything via ethernet to the ISP router other than the R3, disable the WiFi on the ISP router then do a speedtest.net test through the R3. If you get good speeds that'll be it, if not it may not be helping but won't be the main cause

[COD WARFARE]

Yeah will look at that tomorrow Cheers Fraser