18RayF Posted Wednesday at 08:15 PM Posted Wednesday at 08:15 PM Battlenet disconnects and also shows not signed into profile every time when loading COD what can be the cause ?
DARKNESS Posted yesterday at 12:16 AM Posted yesterday at 12:16 AM @18RayF If it's happening every day, then you're likely blocking a relay server with the geofilter. If it just started happening recently, it's most likely a server issue on Battle.net's end.
18RayF Posted yesterday at 12:18 AM Author Posted yesterday at 12:18 AM Been happening every day for last couple months now , how do I reset the geo filter ?
DARKNESS Posted yesterday at 01:03 AM Posted yesterday at 01:03 AM @18RayF A reset will not resolve the issue. Instead, try disabling the device on the Geo-Filter or identify the relay server by monitoring the Geo-Filter while connecting to the servers. Once you identify the relevant servers, either allow them or create a precise polygon around their location. This is recommended as there are typically multiple servers within the same area, and manually allowing each one repeatedly would be time-consuming. If you're not using a geofilter, the issue is likely unrelated and could instead be due to drivers or a NAT problem, though that is rare. The admin will be available tomorrow for further assistance.
18RayF Posted yesterday at 08:39 AM Author Posted yesterday at 08:39 AM So I’ve connected PC to AP and this works fine but LAN doesn’t work for some reason. Not sure why
Administrators Netduma Fraser Posted yesterday at 02:18 PM Administrators Posted yesterday at 02:18 PM Did you disable the Geo-Filter and check that way? We don't know what your physical setup is to determine why that might of worked, if you provide us with some more information about this we can advise
Administrators Netduma Fraser Posted 19 hours ago Administrators Posted 19 hours ago So you still experience the issue with the Geo-Filter fully disabled?
18RayF Posted 16 hours ago Author Posted 16 hours ago Yes so sometimes the game loads I can play , other times I load disconnects me and I have to keep restarting . Also with geo filter why does servers I deny keep connecting ? For example I have all servers outside of London on deny and it still connects to Paris servers
Administrators Netduma Fraser Posted 16 hours ago Administrators Posted 16 hours ago What is the model of the modem/router the R3 is connected to and how have you set that to ensure all traffic flows to the R3? E.g R3 in its DMZ, modem/bridge mode Do you have an Open NAT? Disable Geo-Latency in Geo-Filter settings and it will stick to your radius.
18RayF Posted 4 hours ago Author Posted 4 hours ago So I have my ONT directly connected to my DumaR3 WAN . Not sure if it’s Open NAT
Administrators Netduma Fraser Posted 4 hours ago Administrators Posted 4 hours ago Presumably that means the ONT doesn't give you any WiFi at all? Do you get the same issue with the client/game if you connect your PC via ethernet to the ONT instead?
18RayF Posted 3 hours ago Author Posted 3 hours ago Correct so ONT doesn’t provide WiFi . I can’t connect PC directly to ONT so can’t test that unfortunately.
Administrators Netduma Fraser Posted 3 hours ago Administrators Posted 3 hours ago You said its been happening for the last few months, did it happen after changing anything physically or via settings etc?
18RayF Posted 3 hours ago Author Posted 3 hours ago I haven’t changed anything physically and I changed some settings MTU and lowered Transmit and receive buffers to 256 on mu network adapter on my PC but I reverted them back to original settings and still had same issue.
Administrators Netduma Fraser Posted 2 hours ago Administrators Posted 2 hours ago Have you made any port forwarding rules, internet traffic rules etc? Disable Adblocker on the router if it isn't already and check again please. I've given you Early Access so you can upgrade to that and see if it continues https://forum.netduma.com/forum/151-netduma-r3-early-access/
18RayF Posted 2 hours ago Author Posted 2 hours ago Nope I used to have manual port forwarding but I deleted them as I use UPNP, thanks for that I will try and let you know how it goes. Also when I perform bufferbloat test I have huge spikes on download max ping I can attach picture below . Do you know what can cause this ?
Administrators Netduma Fraser Posted 2 hours ago Administrators Posted 2 hours ago 21 minutes ago, 18RayF said: Nope I used to have manual port forwarding but I deleted them as I use UPNP, thanks for that I will try and let you know how it goes. Also when I perform bufferbloat test I have huge spikes on download max ping I can attach picture below . Do you know what can cause this ? You'll need to fine tune your Congestion Control download percentage to find what works best for you. Once you upgrade this can be found in Ping Optimizer > Advanced
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now