Dunclin Posted July 12 Posted July 12 I can't connect to marvel rivals, ark ascended, neverwinter, etc when connected to the r3. Only game that works is apex legends and doesn't seem like geo filter is working when I add the device. I also followed the steps I seen in many posts close application resync with cloud etc. I've tryed on xbox series x with no geo filter and filter, and finally i tried on pc with geo filter and no geo filter no luck
Administrators Netduma Fraser Posted July 12 Administrators Posted July 12 What is the model of the modem/router the R3 is connected to and how have you set that to ensure all traffic flows to the R3? E.g R3 in its DMZ, modem/bridge mode Can you connect when you connect your device directly to your modem? What changes have you made on the R3 from the defaults?
Dunclin Posted July 12 Author Posted July 12 Modem - Home Hub 3000, I have r3 in the modems dmz there is advanced dmz option though thats unchecked I've tried ethernet and wireless on xsx and wired on pc R3 is basically default I only tried geo filter and ad blocker
Administrators Netduma Fraser Posted July 12 Administrators Posted July 12 Can you take a screenshot of the DMZ page so I can have a look? Do you have the same issue with your Xbox or PC connected directly to your home hub?
Administrators Netduma Fraser Posted July 12 Administrators Posted July 12 Enabled Advanced DMZ and then check again please
Administrators Netduma Fraser Posted July 13 Administrators Posted July 13 I've given you Early Access, see if that version works better https://forum.netduma.com/forum/151-netduma-r3-early-access/
Administrators Netduma Fraser Posted July 13 Administrators Posted July 13 This is an unusual issue, I think it would be best to do a factory reset, complete the setup wizard and don't change anything and see if you get the same issue
Thorkay Posted July 14 Posted July 14 @DunclinSorry to jump on this post but in the screenshot above the geofilter is active yet shows no device selected you need to add the device you want to use with the geofilter .. Top left corner where it states no device select on the (RED ADD) Button- select the device to use with the geofilter . Also try making the circle radius smaller if its to big it wont find matches anywhere below 1800 miles is like the limit before it struggles to find matches this goes for any part of geofilter you select via radius
Dunclin Posted July 14 Author Posted July 14 (edited) Thanks for the reply but I'm just trying to connect to game servers right now and it doesn't let me even without having the device added to geo filter. @Netduma FraserI factory reset same thing happens, cant connect to some game servers all i did was do setup wizard Edited July 14 by Dunclin forgot to reply to fraser
Sentinel82 Posted July 14 Posted July 14 @Dunclin Try reverting back to and earlier version and see if it improves things. I'd suggest 4.0.236 it's been stable in my opinion good luck Zli 1
Administrators Netduma Fraser Posted July 14 Administrators Posted July 14 Could you try to connect to one of the games you have trouble with and then grab the logs from settings please? Hopefully it will have some insights there
Dunclin Posted July 14 Author Posted July 14 I managed to connect to xbox servers on marvel rivals and neverwinter which previously it would not let me connect, unsure as to what I did but atleast i can connect to them now i guess. My pc still can't connect to ark survival ascended heres the logs attached, the most recent logs is me trying to connect to games on xsx and pc. R3_2025-07-14T23_39_12.318Z_logs.txt
Administrators Netduma Fraser Posted July 15 Administrators Posted July 15 When roughly did it occur so I can match it in the logs? What settings have you changed between now and then?
Dunclin Posted July 19 Author Posted July 19 @Netduma Fraser from about 14:05 in these logs to 14:08 is me trying to connect to ark ascended servers multiple times. As for the settings the only thing i did was factory reset xbox, so maybe I had manual ip settings not sure. R3_2025-07-19T17_07_58.688Z_logs.txt
Administrators Netduma Fraser Posted July 19 Administrators Posted July 19 Thanks for that, have you done any port forwarding, disabled UPnP, using DMZ etc on the R3?
Dunclin Posted July 19 Author Posted July 19 @Netduma Fraser Tried all the ports, and the adding to dmz still not working
Administrators Netduma Fraser Posted July 20 Administrators Posted July 20 Do a factory reset and then don't change any settings at all, can you connect to all the games?
Dunclin Posted Friday at 06:34 AM Author Posted Friday at 06:34 AM factory reset multiple times can't connect to ark sa, random dcs frequently on xbox while wired, party chat dcs frequently
Administrators Netduma Fraser Posted Friday at 02:12 PM Administrators Posted Friday at 02:12 PM Disable SmartBOOST fully and also disable BI and DPI in troubleshooting settings please, reboot the router then try again
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now