e32iL Posted Friday at 12:40 PM Share Posted Friday at 12:40 PM Hallo Leute, Ich habe einen telekom vdsl 2 Anschluss. Bislang habe ich den r3 als exposed host mot der fritzbox verbunden. Ich würde gerne mal die pppoe Variante probieren. Funktioniert das überhaupt? Falls ja hat mir jemand bitte eine genau Anleitung? Danke voraus. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted Friday at 02:14 PM Administrators Share Posted Friday at 02:14 PM How you've set it up is fine, you won't notice any improvements really from switching this. You'd need to have the R3 connect direct to whatever the fritz is normally connected to (or set the fritz in bridge mode) then enter the PPPoE details in WAN Settings, then reboot the R3, wait 4 minutes and you should have internet Link to comment Share on other sites More sharing options...
e32iL Posted Friday at 02:24 PM Author Share Posted Friday at 02:24 PM hanks Fraser. I can't put the Fritzbox into bridge mode directly. When I use exposed host I don't have an open NAT with the R3. It's only open when I forward port 3074 from the Fritzbox to Netduma. I can only activate PPPoE passthrough on the Fritzbox but I can't get a connection on the R3. On my PC a LAN cable appears at the bottom instead of the world when there's no connection but, as I said, I can't get onto the internet. Maybe the IP address has to be in the Fritzbox range instead of 192.168.77.1? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted Friday at 03:04 PM Administrators Share Posted Friday at 03:04 PM Where are you checking the NAT status? If you're not getting an open NAT with the exposed host it won't be set correctly or isn't working as it should. You could instead port forwarding all ports to the R3 - 1-65535 TCP/UDP to achieve a similar effect. PPPoE passthrough could work but you'd need to put the PPPoE details into the R3 and then reboot the R3. Nothing to do with the IPs. Link to comment Share on other sites More sharing options...
e32iL Posted Friday at 03:11 PM Author Share Posted Friday at 03:11 PM In cod bo6. Fritzbox exposed host->r3 Ps5 in dmz nat moderat Fritzbox udp 3074->r3 ps5 dmz open nat Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted Friday at 03:22 PM Administrators Share Posted Friday at 03:22 PM Disable the Geo-Filter before launching the game, does it appear open then? Link to comment Share on other sites More sharing options...
Fairypusher Posted Saturday at 02:04 PM Share Posted Saturday at 02:04 PM Wenn du PPPOE nutzen möchtest, dann schau mal bei Kleinanzeigen nach einem Vigor 165 oder 2765 die kannst du beide als Modem nutzen. Der 2765 hat bei der MDM5 Firmware einen sehr aktuellen Modemcode. Alternativ Smart 4 aber Achtung gibt auch einen Smart 4 R... den kannst du auch als Modem betreiben. Es kommt etwas auf deine Leitungslänge an, da funktioniert jedes Modem etwas anders. Die Fritzbox mit ihren Exposed Host ist schon ganz gut. Upnp wäre ein versuch wert: https://www.giga.de/hardware/fritzbox/tipps/fritzbox-upnp-aktivieren-so-gehts-richtig/ Link to comment Share on other sites More sharing options...
e32iL Posted yesterday at 11:30 AM Author Share Posted yesterday at 11:30 AM On 5/30/2025 at 5:22 PM, Netduma Fraser said: Disable the Geo-Filter before launching the game, does it appear open then? Hi fraser disabling geo filter i get open nat. Link to comment Share on other sites More sharing options...
e32iL Posted yesterday at 11:40 AM Author Share Posted yesterday at 11:40 AM 21 hours ago, Fairypusher said: Wenn du PPPOE nutzen möchtest, dann schau mal bei Kleinanzeigen nach einem Vigor 165 oder 2765 die kannst du beide als Modem nutzen. Der 2765 hat bei der MDM5 Firmware einen sehr aktuellen Modemcode. Alternativ Smart 4 aber Achtung gibt auch einen Smart 4 R... den kannst du auch als Modem betreiben. Es kommt etwas auf deine Leitungslänge an, da funktioniert jedes Modem etwas anders. Die Fritzbox mit ihren Exposed Host ist schon ganz gut. Upnp wäre ein versuch wert: https://www.giga.de/hardware/fritzbox/tipps/fritzbox-upnp-aktivieren-so-gehts-richtig/ Hi danke für eine Empfehlung. Ich war die letzten 4 Jahre bei vodafone Business davor telekom da hatte ich auch den vigor 165 aber konnte halt nicht mein festnetz haustelefon nutzen. Muss mal schauen wie der 2765 so ist. Ich habe gelesen dass der 4r nicht als modem funktioniert gab es diesbezüglich ein Update? Telekom anschluss kommt ha vom Keller geht 1 stock hoch ins Wohnzimmer dann wider runter in mein gaming Zimmer. Oben fritzbox ist auch wlan an wegen tv usw glaube sollte schauen dass alles über den r3 verbunden wird. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted yesterday at 04:58 PM Administrators Share Posted yesterday at 04:58 PM 5 hours ago, e32iL said: Hi fraser disabling geo filter i get open nat. Okay so it's just the Geo-Filter blocking the NAT server, you still will have an open NAT using the exposed host. You can either ignore the moderate reading knowing it's actually open or check to see if there are any servers that are blocked at the time you check the NAT and then add those to your allow list. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now