Cant do bridge mode on isp router

[Matija]

I have up stream jitters and up stream package loss in counterstrike 2 ( cabel internet in germany) so I decided to get xr1000 because i read everywhere that router/modem that my isp provide is bad (frizbox 6660) and that xr1000 could help. But there is problem , i cant put my frizbox in bridge mode. When i call isp and ask them to put it in bridge mode they say that option for bridge mode is not possible since 2021 😡. Then i just follow setup instructions provide by Netgear and it works but i still get jitters and package loss on upstream. Im connected with ethernet cabel to xr1000 and did few settings in dumaOS. Could you help me because i dont know anything about networking. Latency spikes to 250ms on upload , download. And i turn off wifi on frizbox. Just dont know what to do and what im doing wrong, and even if i did anything good 😂 if you can help please help

[DARKNESS]

@MatijaA router cannot resolve packet loss issues that originate outside the network, which appears to be the case. Have you had a technician inspect your node and box unit? If you conduct a pingplotter test for approximately five minutes, what results do you obtain?

[Matija]

[Matija]

@DARKNESS

[DARKNESS]

@MatijaUse google.com or 8.8.8.8 as it is more reliable for data. 

[Matija]

[Matija]

@DARKNESS

[Matija]

But my problem is mainly in cs2, upstream jitters and upstream package loss 0.5%-2.5% 

and miss delivery 

[Matija]

Top right 

[DARKNESS]

@MatijaSo did you set up QoS on the XR1000? What you can do is add the XR1000 WAN IP to the Fritzbox on the DMZ settings and then let the XR1000 handle all your devices.

[Matija]

I set up QoS but nothing changes, could u guide me how to do dmz and is it safe to do, sorry im noob

[DARKNESS]

@MatijaDid you set it up to always on the QoS page? Because if it’s on auto, then it’s not going to properly apply as it would only apply when it detects certain applications. DMZ isn’t safe, but it’s the only option if you want to open ports while gaming through the XR1000.

[DARKNESS]

@MatijaHere’s a link that you can use as a reference to find the option after you do take the WAN IP from the XR1000 and add that to the Fritzbox.

• https://nl.fritz.com/service/knowledge-base/dok/FRITZ-Box-6660-Cable/131_Exposed-host-in-FRITZ-Box-configureren/

[Matija]

Okay thank you, but if its not safe i dont think i should do it because i dont know what im even doing, but thank you so much for u time . Really appreciate it .❤️

[DARKNESS]

@MatijaCool, no big deal. Understandable, as you’re on PC as well, so hackers and DDoS are more prevalent. So for QoS, just tweak your speeds to where you no longer have packet loss. The best way to do this is to run a speed test or use something like Waveform. Do remember to connect all devices to the XR1000 or just simply disable Wi-Fi bands on the Fritzbox if it’s an option.

[Matija]

Will do, wifi already disabled, could be just bad cabel infrastructure or overbooked isp , but thanks alot 👍🍺

[Netduma Fraser]

It's safe to put the XR in the exposed host option on the fritz as the XR has its own firewall.

How did you setup QoS exactly?

[Matija]

[Matija]

[Netduma Fraser]

Reset bandwidth allocation, gaming barely uses any and that won't be making it use more. How did you set Traffic Prioritization? 

Are ALL devices connected to the XR?

Looks like you'll need to keep fine tuning the Congestion Control percentages to get a better result there

[Matija]

Everything is connected to xr, wif on isp router off. I will reset bandwidth allocation. Traffic prioritization just duma os classified games

[Matija]

[Matija]

i just care about counterstrike 2, i other games i dont have problems

[Matija]

can u check this , maybe that my problem 

 

[Netduma Fraser]

The above isn't your issue, you have plenty of bandwidth. 

Are any other devices in use when you're playing?