VanillaCokeZz Posted February 1 Posted February 1 Good morning, I have the following question: Does the WPS button on the R3 router work? And if so, how do I get the R3 to connect to my meshrepeater? I pressed the button on the back of the router and there was no connection on the repeater
Administrators Netduma Fraser Posted February 1 Administrators Posted February 1 It should be working on the latest Early Access versions. It can sometimes take a few tries to work, hold it down and the WPS light should start flashing, then I think you have 2 minutes to initiate on another device
VanillaCokeZz Posted February 1 Author Posted February 1 32 minutes ago, Netduma Fraser said: It should be working on the latest Early Access versions. It can sometimes take a few tries to work, hold it down and the WPS light should start flashing, then I think you have 2 minutes to initiate on another device The WPS button does not work for me after I have pressed it several times. I would like to connect the router to a Wi-Fi mesh repeater to cover the signal throughout the house. Is this technically possible?
Administrators Netduma Fraser Posted February 1 Administrators Posted February 1 Apparently WPS may not be working correctly again, we'll need to look into it. It should be possible yes though we haven't got specific support for mesh - if you check the manual for the repeater it should have an alternative way for you to connect it
sintyrantnz Posted February 4 Posted February 4 i can not get the WPS button to work at all on my R3 is there a patch coming sooon?
Administrators Netduma Fraser Posted February 4 Administrators Posted February 4 10 hours ago, sintyrantnz said: i can not get the WPS button to work at all on my R3 is there a patch coming sooon? Could you try changing the SSID of the WiFi and then try WPS please and see if it works?
VanillaCokeZz Posted February 4 Author Posted February 4 @Netduma AlexTold me that the WPS function should work with the next public firmware. Netduma Fraser 1
ManuMarco Posted March 19 Posted March 19 Hi! I recently bought the Netduma R3. I have version v4.0.540. Reading the forum I noticed that the WPS button doesn't work for me either. I can't activate it to associate a printer. Would you know how to help me? thank’s Manuela
ManuMarco Posted March 20 Posted March 20 @Netduma FraserHi! I recently bought the Netduma R3. I have version v4.0.540. Reading the forum I noticed that the WPS button doesn't work for me either. I can't activate it to associate a printer. Would you know how to help me? thank’s
Administrators Netduma Fraser Posted March 20 Administrators Posted March 20 19 hours ago, ManuMarco said: Hi! I recently bought the Netduma R3. I have version v4.0.540. Reading the forum I noticed that the WPS button doesn't work for me either. I can't activate it to associate a printer. Would you know how to help me? thank’s Manuela If you hold the button for 5 seconds you should have 2 minutes roughly to connect another device - the WPS light won't appear though but it doesn't necessarily mean it's not working. If it doesn't work when trying to connect then it is possible it's regressed again and I'll have to pass it on to the team
ManuMarco Posted March 20 Posted March 20 @Netduma FraserHi! I did as you said, trying to synchronize the printer to the router for 2 minutes but nothing. How is it solved?
Administrators Netduma Fraser Posted March 20 Administrators Posted March 20 12 minutes ago, ManuMarco said: @Netduma FraserHi! I did as you said, trying to synchronize the printer to the router for 2 minutes but nothing. How is it solved? Thanks for the report, the team will need to work on a fix then, I'll let them know
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now