LunaticFace Posted January 19 Posted January 19 Hello there, new member here - I'm trying to setup the ports for my PS Portal for remote play with the PS5. I added all rules but deleted one by accident. Which was port 987. Now when I try to add it back it tells me my ports overlap. They don't as far as I'm aware. Here's a photo: What can I do to rectify this? Cheers.
Administrators Netduma Fraser Posted January 19 Administrators Posted January 19 Please reboot the router from the interface and then see if you can re-add the rule again
LunaticFace Posted January 19 Author Posted January 19 1 hour ago, Netduma Fraser said: Please reboot the router from the interface and then see if you can re-add the rule again Hi thanks for the reply. Unfortunately that did not work :(
Administrators Netduma Fraser Posted January 19 Administrators Posted January 19 I wasn't able to reproduce the issue but delete all the rules then reboot, then add them again, does it work then?
LunaticFace Posted January 22 Author Posted January 22 On 19/01/2025 at 18:11, Netduma Fraser said: I wasn't able to reproduce the issue but delete all the rules then reboot, then add them again, does it work then? Apologies, I was away at the weekend. I've tried what you've said to no avail. Still exactly the same issue!
aws bama Posted January 22 Posted January 22 hi don't add it manually. Just add your ps5 as DMZ at port forwarding page. this will open all ports for you. i have ps5 portal and with this its working fine with me
LunaticFace Posted January 22 Author Posted January 22 Cheers mate. I'll do that and see how I get on. Appreciated
Krush Posted January 22 Posted January 22 Hi ! By the way, remember to take the device out of the R3's DHCP range by defining a static IP (DHCP R3) before adding it to the R3's DMZ. 😉
LunaticFace Posted January 22 Author Posted January 22 2 minutes ago, Fuzy said: Hi ! By the way, remember to take the device out of the R3's DHCP range by defining a static IP (DHCP R3) before adding it to the R3's DMZ. 😉 Thank you. You mean have a static IP reserved before I assign it into the DMZ? If so, this is what I've done 😁
David J Posted January 22 Posted January 22 1 hour ago, Fuzy said: Hi ! By the way, remember to take the device out of the R3's DHCP range by defining a static IP (DHCP R3) before adding it to the R3's DMZ. 😉 take it out of the R3 DHCP range?....you mean give your console a ip addy over 250? like 192.168.77.251? or am I reading it wrong?
648 USD - Wasted on DumaOS Posted January 23 Posted January 23 14 hours ago, David J said: take it out of the R3 DHCP range?....you mean give your console a ip addy over 250? like 192.168.77.251? or am I reading it wrong? @David J Hey man , i was browsing by and noticed you are having a bit of a difficult time. Good news, rather in the range of pictures and step by step instructions and color coded as this helps me especially when were just typing back and forth. Some wording by other people and their choice of explanation can be some what cunfusing . WEll here you go. Quick instructions below. TIP - Before Starting this little guide i put together for you, I STRONGLY RECOMMEND you got to the devices your want to RESERVE aka Static IP for and CONFIGURE on each device that you are wanted to RESERVE. Example - Smart TV - Setting - Network - Custom Enter IP - 192.168.1.200 255.255.255.0 prefix length (24) Router / IP - 192.168.1.1 DNS1 - 1.1.1.1 DNS2 - 1.0.0.1 APPLY/TEST Then immediately go to DUMA OS and follow these steps . Picture below for guide. , This is where the (Green and Blue ) come from : Hope this helps , as i can understand better if i can see or visualize what people are trying to say. Green Arrow : Starting IP Address : Set to - 2 ENding IP Address : Set to - 100 Apply Blue Arrow: Click ADD: Add your device (if not identified with name , find by the MAC number, if anything just go to device manager right quick and memorize the last to mix of numbers and letters in the last column and come back and do it again. This way when you select , you can identify your device and add it properly. WIll be PROMPT to give device name: Krush 1
Administrators Netduma Fraser Posted January 23 Administrators Posted January 23 On 1/22/2025 at 7:28 AM, LunaticFace said: Apologies, I was away at the weekend. I've tried what you've said to no avail. Still exactly the same issue! Could you make a video of what you're doing and showing it failing if possible?
LunaticFace Posted January 24 Author Posted January 24 9 hours ago, Netduma Fraser said: Could you make a video of what you're doing and showing it failing if possible? Yes sure
LunaticFace Posted January 24 Author Posted January 24 Video added @Netduma Fraser Just to add, I removed all ports and DMZs. Rebooted the router. THEN took this video dumaports.mp4
Administrators Netduma Fraser Posted January 24 Administrators Posted January 24 Thanks for that, is UPnP showing that port as being open at the time?
LunaticFace Posted January 24 Author Posted January 24 Apologies I've a little knowledge with networking but I'm no expert. UPnP shows this at the moment:
Administrators Netduma Fraser Posted January 24 Administrators Posted January 24 That looks fine, have you made any static routes or internet rules? Perhaps a HybridVPN rule etc?
LunaticFace Posted January 24 Author Posted January 24 38 minutes ago, Netduma Fraser said: That looks fine, have you made any static routes or internet rules? Perhaps a HybridVPN rule etc? No mate. both those sections are blank/empty.
Administrators Netduma Fraser Posted January 24 Administrators Posted January 24 It's somehow got itself into a weird state, I think the only thing to be done is a factory reset as there is no other way to clear it
Administrators Netduma Fraser Posted January 24 Administrators Posted January 24 Yeah sorry! Let us know if that works
LunaticFace Posted January 25 Author Posted January 25 Factory reset did solve the problem. I even deleted 987 and re-added it. Very strange! Cheers
Administrators Netduma Fraser Posted January 25 Administrators Posted January 25 Very strange indeed but glad to hear that solved it, thanks for the update!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now