Assistance with Bridging Netduma R2 to Unifi Gateway for PS5 Geolocation Use

[Paul Maos]

@Netduma Fraser@Kingzzy - A simple configuration without the VLAN would be ok for me. What should I put under DNS?

[Kingzzy]

Google or cloudflare

[Paul Maos]

@Kingzzy@Netduma FraserIT WORKED!! thank you

I do have a question as well. If I would like this to be on the VLAN 6, here is the TOPOLOGY in the port. How would I set this up if I wanted to get my Netduma and the ps5 through a VLAN

[Kingzzy]

28 minutes ago, Paul Maos said:

@Kingzzy@Netduma FraserIT WORKED!! thank you

I do have a question as well. If I would like this to be on the VLAN 6, here is the TOPOLOGY in the port. How would I set this up if I wanted to get my Netduma and the ps5 through a VLAN

Your initial configuration was more or less good since the R2 received an IP in 192.168.6.xx except for the forwarding ports that I could see you had put the IP in 192.168.1.119 instead of 192.168.6.xx and for the dhcp range do not start with 1 but rather from 10. Seen in the R2 logs there is a dhcp error compared to the IP of the PS5 I advise you to do a manual configuration of the network at the PS5 level...Configure vlan 6 to the desired port at the unifi level...Test it like that already....