R2 Speed Issue

[Gunganator]

My ISP provided Hub recently died so had to jump onto the R2 only. My ISP speed is 900/125


Firmware ver 

Wired connection Cat 6 for Both and tested on a RJ45 Advanced cable tester for continuity and shorts, still replaced with another set of two tested cables and issues persists.

Not getting the expected 900/125 

Speedtest result

Enabled Traffic rules

Speedtest result with traffic rules

 

Network settings

 

Connected to IP'S ONT via PPPoE options 

There I think I have covered everything you might ask me to check 

 

please advise how to get the 900 instead of the 450 I am currently seeing on a port claiming to be 1Gbps.

 

[Gunganator]

BTW signed up for beta firmware

 

[Netduma Fraser]

You don't need those traffic rules. By the looks of it you've told the router your bandwidth speeds are 419/102 - change it to what you expect in the Congestion Control menu  and see if you get better results then.

[Gunganator]

Disabled QOS and DPI 

[Netduma Fraser]

Don't worry about the internal test, it's not always going to be accurate. You said your ISP hub died so what's the setup now specifically? 

I've given you Early Access to try that firmware: https://forum.netduma.com/forum/144-netduma-r2-early-access/

[Gunganator]

R2 is plugged directing into the ONT via the WAN and my PPPoE details added to the WAN network settings.

 

[Netduma Fraser]

Ah okay, I think it'll be due to using PPPoE and that'll be the max you can achieve while having the R2 handle it.

[Gunganator]

well poo, better than no network at whilst I await the new hub.

 

BTW on a side note does the new R3 fix the overheating issue that caused wifi and what not to become unstable on the R2?
I fix my R2 by adding a small platform under it with a 5v USB fan  stopped falling over all the time, hence why I haven't needed to post here for years.

 

[Netduma Fraser]

I've not encountered anyone mentioning the R3 overheating thus far and given we're in the height of summer I'd take that as a good sign!

[FireSuds]

Can i also be sign up for R2 early access 

[Netduma Fraser]

8 minutes ago, FireSuds said:

Can i also be sign up for R2 early access 

You'll need to sign up here: https://forum.netduma.com/topic/39415-introducing-early-access/ and then we can get you added.