Netduma r2 tried upgrade 3.0.394 to 3.3 i think is bricked

[Krzysztof]

I tried factory reset, i tried upload firmware 3.3 again,switching router for more than 10min and try again. When try update again i can select firmware files but nothing happens 

[DARKNESS]

When logging to the interference use incognito mode on the browser as it doesn't save cache and it might just be showing the prompt from prior login. What I would do is do a factory reset but from the interference and then try updating it as quickly as possible by skipping the wizard setup.

[Netduma Fraser]

What is the firmware file you tried to upgrade to exactly? Good advice above also.

[Krzysztof]

16 minutes ago, Netduma Fraser said:

What is the firmware file you tried to upgrade to exactly? Good advice above also.

3.3 latest my router is 3.0.394

 

[Netduma Fraser]

Do you mean you're trying to upgrade to this one? https://forum.netduma.com/topic/50710-new-r2-firmware-33280/

[Krzysztof]

8 hours ago, Netduma Fraser said:

Do you mean you're trying to upgrade to this one? https://forum.netduma.com/topic/50710-new-r2-firmware-33280/

Yes

 

[Netduma Fraser]

Are you able to load the System Information page correctly?

[Krzysztof]

1 minute ago, Netduma Fraser said:

Are you able to load the System Information page correctly?

No. After clean up browser history all i can see is red screan with loading circle 

 

[Netduma Fraser]

Did you try to reboot or factory reset while it was upgrading by any chance? 

Hold the reset button for 30 seconds, then wait 4 minutes before accessing the interface and see if it loads then please

[Krzysztof]

I did update and let him running for about 15min. After this time loading circle was still running 🤷‍♂️🤷‍♂️ left it for another 10min. No results.  Switched off and on again. Tried update again.  No result 🤷‍♂️🤷‍♂️

[Netduma Fraser]

Okay do the reset and let us know how you get on

[Krzysztof]

I will.  Once i back home