r3 from spain, router vodafone

[EtDr]

i cant connect my routter, im from spain, and i have a router vodafone.
can some help?

[Netduma Fraser]

Have you connected the R3 via ethernet to your existing vodafone router? Have you accessed the R3 interface in your web browser or DumaOS mobile app and completed the Setup Wizard? You will need to do this before you can get internet.

[EtDr]

i cant put the router original in bridge mode. and i cant complet the setup wizard in mobile app

[Netduma Fraser]

Can you provide more information about why you're unable to complete the wizard through the app?

[EtDr]

in the app mobile, cant complete the process. error of authenthification
the ethernet cable is on wan port sure?

[Netduma Fraser]

Authentication of the WiFi credentials or interface credentials? Default username/password is admin & password if you changed it during the setup you may need to then login again with those new credentials

[EtDr]

My internet not works. All is connect but i havent conection wifi and not conexion ethenet

[Netduma Fraser]

Have you completed the Setup Wizard now? If so, reboot your modem, wait 2 minutes, then reboot the R3, wait 4 minutes then check

[EtDr]

Yes, i complet all.

But the ping and conection in games is so bad.

With original router have searchs 19 ping, with the router have 25/30 ms

And the lobbys are so complicated, not bot lobbys

[Netduma Fraser]

The router purpose isn't to get you bot lobbies. Disable Steady Ping on the Geo-Filter page by clicking Steady Ping at the top of the map and the ping will be more as you expect.

[EtDr]

I disable it. And i play with diferents configurations, and the ping is so bad. Is changing all time and more hight

[Netduma Fraser]

Are you getting a worse ping than mentioned as it's not a bad ping at all really. What is the model of the modem/router the R3 is connected to and how have you set that to ensure all traffic flows to the R3? E.g. R3 in its DMZ, modem/bridge mode. Are ALL devices connected to the R3? 

[EtDr]

The r3 is connected for wan port.

All devices are coneccted to the r3 módem.

Always have nat moderate, and i open the port manually, and active dmz.

But the worst is, my ping

With original módem begin to search at 15 ms, and now begin at 60 ms, or another times to 160 ms.

Is so bad, the lobbys is on 140 ms

[Netduma Fraser]

How have you set the ISP modem though to allow you an Open NAT? You will need to do modem/bridge mode or put the R3 in its DMZ

[EtDr]

And for the ping, what happen?

[Netduma Fraser]

That could be contributing

[titofuenla]

16 hours ago, EtDr said:

Y con el ping, ¿qué pasa?

como tienes  configurado el filtro geografico? depende de como lo tenga configurado empezara a buscar por un ping o por otro.

podrias facilitar una captura de pantalla de tu geofiltro?

[EtDr]

Lo quité, está desactivado.

[titofuenla]

como le pregunto fraser, tiene puesta la IP dentro del DMZ del router de vodafone? puede ser motivos por lo que la nat sea moderada y obtenga mas ping.

[EtDr]

En el router de vodadone no puedo poner la ip del r3

[Netduma Fraser]

What options does it have for DMZ? MAC Address? or does it not have a DMZ function? Alternatively it may have a modem/bridge mode that could be used

[EtDr]

For dmz can put only ip. And if i put the ip of router netduma, not can be save.

The modem cant put in bridge mode.

[Netduma Fraser]

You put the WAN IP of the R3 which you can find on the R3 Settings > WAN page. You don't put the 192.168.77.1 IP in.

[EtDr]

Thanks. I go to see it

[EtDr]

I cant see nothing about configurate dmz in the original router.

Where is the post?

Thx always