Administrators Netduma Fraser Posted January 29, 2022 Administrators Share Posted January 29, 2022 Thanks for that, disable IPv6 in LAN and WAN, also disable Port Scan and Syn Flood Protection, reboot the gaming device and see if it works from then on please Milkweed79 1 Link to comment Share on other sites More sharing options...
Wafle_house Posted May 1, 2022 Author Share Posted May 1, 2022 I am coming back with good news. After a few months of error and trial I was able to find a solution to this problem but it's pretty annoying after a while but the solution I would have to restart the router and, in the process, would have to restart my computer but I also noticed sometimes I would have an open NAT or moderate connection. Well I hope this Answer a lot of question and you guys are able to find a solution for the next update it would be great if you guys can add an option where you can schedule a maintenance to reboot the router a number of times during the week or as the customer pleases to. Netduma Fraser 1 Link to comment Share on other sites More sharing options...
Milkweed79 Posted December 8 Share Posted December 8 Having the same issue. Got internet connectivity on my ps5 but call of duty won't let me login into the servers. Wierd stuff been happening with my r2 every since I went to 4.0 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted December 8 Administrators Share Posted December 8 7 hours ago, Milkweed79 said: Having the same issue. Got internet connectivity on my ps5 but call of duty won't let me login into the servers. Wierd stuff been happening with my r2 every since I went to 4.0 Have you blocked any servers on the Geo-Filter at all? If you disable the Geo-Filter can you get in? Link to comment Share on other sites More sharing options...
Milkweed79 Posted December 14 Share Posted December 14 no I havent. it was factory reset after the early access to os 4.0 and never even set up any of my static routes or port forwarding. then it stopped getting an ip issued from my modem. after on the phone with spectrum we determined my modem was malfuctioning. got a new one and it was still having issues. it was only detecting half my bandwidth as well. I never got a notification from gmail that i had a reply from netduma. so i tried rolling back to a previous update hoping the problems were from the 4.0. after it installed the older firmware it became bricked. when I enter the gateway address the page just displays no such file or directory. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted December 14 Administrators Share Posted December 14 Are you able to access via the app at all when this happens? Link to comment Share on other sites More sharing options...
Milkweed79 Posted December 17 Share Posted December 17 Wasn't aware there was one. I will download it and attempt to use it when I get home from work. Netduma Fraser 1 Link to comment Share on other sites More sharing options...
Milkweed79 Posted December 18 Share Posted December 18 Downloaded the app. Can't connect to wifi. Says incorrect password. Factory reset with the button on back of unit to use the default factory password and still said incorrect password. Link to comment Share on other sites More sharing options...
Milkweed79 Posted December 18 Share Posted December 18 No way freaking way. I literally had given up all hope. I kept pushing the reset button. Like 15 times in a row spamming it and then unplugged it for 15 seconds and plugged it back in. The interface finally came back. Link to comment Share on other sites More sharing options...
Milkweed79 Posted December 18 Share Posted December 18 So I'm back to firmware 3.2.453 with a factory reset. For some reason when I type the gateway 192.168.77.1 it redirects to 192.168.77.1/dumaweb where it displays no such file or directory. I have to use a dashboard address from one of the Rapps to have access to the interface. For now it is allowing me to login to cod servers. Doing speed speeds tests through the benchmark testing on the R2 and through Google I'm pulling about half of my bandwidth. Even when bandwidth allocation is even through all devices I've noticed longer than usual load times with the wifi. I do have 1 system log taken from a couple weeks ago right before I rolled back from Duma os 4 if you want me to upload that. Everything seems to be functioning right except the slow loading times on the wifi and half bandwidth through the wan on the r2 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted December 19 Administrators Share Posted December 19 Clear your browser cache/cookies and then it should stop redirecting you. Don't use the benchmark for speeds, what do you see on speedtest.net? How is Congestion Control set? Disable Adblocker and see if that speeds up loading Link to comment Share on other sites More sharing options...
Milkweed79 Posted December 21 Share Posted December 21 I havent configured anything yet. I anticipated factory resets while this is getting resolved. Everything is at factory settings besides the admin and wifi password. I cleared the cache and cookies and still get the netduma redirect. Not really a concern for me as I circumvented my way around it into the interface. Im still only pulling a little over 200 of my 400 bandwidth and about only 3mbps on the wifi for some reason. I took some pictures if theyre helpful. Maybe I should enable the remote connect and let you and your team poke around? I feel like a component in the router is going out. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted December 21 Administrators Share Posted December 21 Are you using PPPoE/VLAN or DHCP identifiers to get a connection by any chance? Link to comment Share on other sites More sharing options...
Milkweed79 Posted December 21 Share Posted December 21 The modem is dynamic. And I used the dhcp in the router for connected devices. I changed the r2s gateway to 77.2 and the solved that redirect issue for me. I disabled the 2.4 wifi to force connection to 5 and now wifi is making available whatever the r2 has. Only issue left is the half bandwidth. Tv has 100mb cable but everything else including the wan has new cat 6. I don't know what the problem could be. It's not allowing me to login to call of duty servers again. Reboot seems to solve this where as before the firmware rollback it wasn't. Modem is brand new as well. When I rolled back the firmware I had spectrum send a new one. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted December 21 Administrators Share Posted December 21 I suspect the change in LAN IP working was more likely that the system reloaded itself, I imagine if you change it back it will work again. As a test, if you tell the router your speeds are 1000/1000 and run a test what results do you get? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now