Jump to content

Reset Netduma WiFi not working


DT1717

Recommended Posts

I have just reset my Netduma R2 unit and now the wireless network is not working. The preconfigured password was set to a different password from the sticker on the box and when setting my own SSID and password this network does not appear and there seems to be quite a few entries in the log indicating issues with the WiFi. 

 

Wed Mar 24 19:33:17 2021 daemon.warn hostapd: Failed to check if DFS is required; ret=-1 Wed Mar 24 19:33:12 2021 daemon.err hostapd: Failed to set beacon parameters Wed Mar 24 19:33:11 2021 daemon.err hostapd: Wrong coupling between HT and VHT/HE channel setting Wed Mar 24 19:33:11 2021 daemon.warn hostapd: Failed to check if DFS is required; ret=-1 Wed Mar 24 19:33:11 2021 daemon.warn hostapd: Failed to check if DFS is required; ret=-1 Wed Mar 24 19:33:10 2021 daemon.info hostapd: wlan0: STA 04:33:c2:dd:59:32 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE) Wed Mar 24 19:33:10 2021 daemon.info hostapd: wlan1: STA 04:33:c2:dd:59:32 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE) Wed Mar 24 19:33:06 2021 daemon.err hostapd: Failed to set beacon parameters Wed Mar 24 19:33:05 2021 daemon.err hostapd: Wrong coupling between HT and VHT/HE channel setting Wed Mar 24 19:33:05 2021 daemon.warn hostapd: Failed to check if DFS is required; ret=-1 Wed Mar 24 19:33:05 2021 daemon.warn hostapd: Failed to check if DFS is required; ret=-1 Wed Mar 24 19:33:00 2021 daemon.err hostapd: Failed to set beacon parameters Wed Mar 24 19:32:59 2021 daemon.err hostapd: Wrong coupling between HT and VHT/HE channel setting Wed Mar 24 19:32:59 2021 daemon.warn hostapd: Failed to check if DFS is required; ret=-1 Wed Mar 24 19:32:59 2021 daemon.warn hostapd: Failed to check if DFS is required; ret=-1

 

 

Link to comment
Share on other sites

  • Administrators

Disable the WiFi from the router settings, apply, reboot from the interface, wait 2 minutes, then enable wifi, apply, then reboot from the interface, wait 2 minutes and then see if it is working properly then please.

Link to comment
Share on other sites

On 3/24/2021 at 8:07 PM, Netduma Fraser said:

Disable the WiFi from the router settings, apply, reboot from the interface, wait 2 minutes, then enable wifi, apply, then reboot from the interface, wait 2 minutes and then see if it is working properly then please.

Thanks for the advice tested and it’s now all up running! Can’t start playing with all the cool settings like QOS now! 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...