devi343 Posted October 8, 2020 Share Posted October 8, 2020 So I downloaded the beta 3.0 hoping it would fix the constant internet outages everyday and now im no longer getting my download speeds. Ill post in order what I did and what changed. -installed 3.0 -Speeds remain the same about 930-950 download and upload 100. -did the recommended factory reset. -now download speed is capped at 60 and upload 100. (speedtest.net reports 60 and the router speed test reports 400) -turned off QOS entirely and now speedtest.net says im capped at 100 download and again 100 upload. -Speed on the router is set to 950 download and 100 upload. So heres something im noticing is when I look at the device manager in table mode it shows port 2 as full duplex and capped at 100mbits. This is the port my computer is connected too so why did it to do that and how do i change it? However whats more off is below that table it shows my computer as being on port 3 and open to 1000mbits so im seeing 2 different things here but physically my computer is connected to port 2 on the router. Its connected with a brand new cat8 that was working just fine for months so no its not the cable or my computer as I have a gbit port on the computer and again been working fine for months with this router and years before that. I have no modem never have. My ISP uses fiber and the internet cable is plugged directly into the router from the outside. Also my ISP speeds are 1000/100. So please help get this corrected. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted October 8, 2020 Administrators Share Posted October 8, 2020 Please post here for any XR beta related issues and we can look into it: https://community.netgear.com/t5/Nighthawk-Pro-Gaming-DumaOS-3-0/bd-p/en-home-beta-npg-duma Link to comment Share on other sites More sharing options...
devi343 Posted October 8, 2020 Author Share Posted October 8, 2020 ok so whats this forum for? I thought this was netduma? The issue here is the netduma 3.0 so whats the issue? why would I post this on netgear site when they provide the router and you all provide the OS? Link to comment Share on other sites More sharing options...
Newfie Posted October 8, 2020 Share Posted October 8, 2020 It’s a netgear router and a netgear beta so it helps them to understand any issues with their hardware and their firmware. Link to comment Share on other sites More sharing options...
Guest Killhippie Posted October 8, 2020 Share Posted October 8, 2020 Also Netgear provide the wifi and Ethernet drivers for the router. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted October 8, 2020 Administrators Share Posted October 8, 2020 7 minutes ago, devi343 said: ok so whats this forum for? I thought this was netduma? The issue here is the netduma 3.0 so whats the issue? why would I post this on netgear site when they provide the router and you all provide the OS? Normally yes that would be the case but we are not running this beta so they want all information on there. It is also a lot each to track issues etc rather than split over two sites. Link to comment Share on other sites More sharing options...
devi343 Posted October 8, 2020 Author Share Posted October 8, 2020 ok so dumaos is created by netduma...however you dont support your OS netgear supports it? That makes absolutely no sense not to mention this is a subforum specifically for XR500 support on your forums. "DumaOS on NETGEAR Nighthawk Support" Link to comment Share on other sites More sharing options...
devi343 Posted October 8, 2020 Author Share Posted October 8, 2020 1 minute ago, Netduma Fraser said: Normally yes that would be the case but we are not running this beta so they want all information on there. It is also a lot each to track issues etc rather than split over two sites. ok if you say so, Im just pissed off because im getting the run around. I paid 250 for this router specifically for your OS that has been nothing but problems since day one. Even using the geo filter my latency on games like COD and WoW have gone from in the 44 range with the 10 year old router to 80 in WoW and 90 on COD and im being pushed off to netgear whos support is so bad they couldnt tell their face from their ass. Link to comment Share on other sites More sharing options...
Guest Killhippie Posted October 8, 2020 Share Posted October 8, 2020 7 minutes ago, devi343 said: ok so dumaos is created by netduma...however you dont support your OS netgear supports it? That makes absolutely no sense not to mention this is a subforum specifically for XR500 support on your forums. "DumaOS on NETGEAR Nighthawk Support" Netgear router, Netgear beta including their code, Netgear need to see the results not Netduma. Netgear will consult with Netduma I imagine if needed during the process. Also there are Netgear beta testers on that forum that can help you. Link to comment Share on other sites More sharing options...
Guest Killhippie Posted October 8, 2020 Share Posted October 8, 2020 Since nobody here can really help you its probably best if @Netduma Fraser this thread is closed. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted October 8, 2020 Administrators Share Posted October 8, 2020 I can see you've posted over there so thank you, I will be the one responding to you, I'm not pushing you on to Netgear just asking you to post in the correct place. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.