secretface Posted September 23, 2016 Share Posted September 23, 2016 https://gyazo.com/3bdff57cf9a99bd179db2f513126c686 Please can someone help a brother out. A little backround I installed a new modem A Cisco DPC3008 the same exact one I was renting from comcast Just own it so I'm not renting. Anyaway it took a hell of a long time to get the duma to work with it. had this problem with other comcast modems. Anyway I had to do several restarts after each change to get these to speak to each other but now I have this page. My speeds are slower than I get from directly at the modem but that may be caused by the congestion control slider I cannot see. Hopefully one of you has seen this before and can help me out. Everything else is working just fine with it. Link to comment Share on other sites More sharing options...
secretface Posted September 23, 2016 Author Share Posted September 23, 2016 So I figured out the cure. Unplug duma, walk dog come back and plug in. LOL Its all good please close thread. Link to comment Share on other sites More sharing options...
iAmMoDBoX Posted September 23, 2016 Share Posted September 23, 2016 So I figured out the cure. Unplug duma, walk dog come back and plug in. LOL Its all good please close thread. Step 1 - Turn it off and turn it back on Always the first thing to try Link to comment Share on other sites More sharing options...
Slipknot31286sic6 Posted September 23, 2016 Share Posted September 23, 2016 Fraser stated. If u get a new modem. Reset netduma. Turn know modem and wait a min then plug in netduma ... Guess takes time for each to talk? I upgraded to a new 16x4 line cable modem. It was a bitch to get netduma to talk to modem. Seems netduma needs time to think or something. We'll worth 180/25 conn. Though. Link to comment Share on other sites More sharing options...
secretface Posted September 23, 2016 Author Share Posted September 23, 2016 Fraser stated. If u get a new modem. Reset netduma. Turn know modem and wait a min then plug in netduma ... Guess takes time for each to talk? I upgraded to a new 16x4 line cable modem. It was a bitch to get netduma to talk to modem. Seems netduma needs time to think or something. We'll worth 180/25 conn. Though. Step 1 - Turn it off and turn it back on Always the first thing to try Yes I had done that and that. Last time I had to manually put in the ip address (wan ) to get it to work. I think this all is a comcast issue. They block so many ports its damn near impossible to have some gadgetry work. But us nerds will find a way. LOL I guess it just needed to take a breath for more than 30 seconds. Thanks for the ideas Guys love you all kisses! Link to comment Share on other sites More sharing options...
bagsta69 Posted September 24, 2016 Share Posted September 24, 2016 Great to hear you got it all back working, Ill close the thread (mark as solved) as you asked but if you have any more issues please open up another one Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.