djkhaled Posted June 10, 2016 Share Posted June 10, 2016 Title is as follows I'm a streamer that uses 2 PC's to stream the only reason I bought the Netduma was to use the VPN-Hybrid feature which is working pretty well. The 500/500 Speed is fine and that PC works fine. But thats my girlfriends PC and my main computer/streaming computer only get 93/93. I've trouble shooted literally everything you can think of to buying a new nice Ethernet cord to switching out the slots and different pcs. The strange thing is the speed is fine when connected to my ISPs modem 800/800 but its 93/93 when hooked into netduma. Also another strange thing is my StreamPC was having 500/500 for about 30 minutes so this is weird inconsistency. But of course its not the Ethernet cords/ports since I get 800/800 on all devices plugged into the modem and also swapped out the Ethernet cords testing to see if its one of them. Also tested safemode with networking with no avail. And its cant be software related since its 800/800 on modem connection also since I had 500/500 on StreamPC for that short period. Followed all the guides of course and checked the forum with searches any suggestions maybe something I'm missing? what do Speeds. Average speed for direct modem connections on all devices. http://i.imgur.com/zg4w8GB.png Netduma speeds for My PC and Streaming PC.(they are the same) http://i.imgur.com/2qNs05a.png Netduma speed on my girlfriends PC 500/500 will get screenshot in the morning gn Link to comment Share on other sites More sharing options...
djkhaled Posted June 10, 2016 Author Share Posted June 10, 2016 girlfriend has lower latency than normal which is good news but still issues on my other two comps not sure what it could be Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Crossy Posted June 11, 2016 Netduma Staff Share Posted June 11, 2016 Have you followed the instructions here? Is congestion control set to 100%? Is device prioritisation reset and is share excess ticked? Link to comment Share on other sites More sharing options...
Buds Posted June 11, 2016 Share Posted June 11, 2016 . Link to comment Share on other sites More sharing options...
djkhaled Posted June 12, 2016 Author Share Posted June 12, 2016 Have you followed the instructions here? Is congestion control set to 100%? Is device prioritisation reset and is share excess ticked? yeah that was the page i was scanning with my eyes before making this post Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 13, 2016 Administrators Share Posted June 13, 2016 Hey, can you try this please: Reactive Algorithm 100% anti-flood Share excess enabled Reset device prioritisation & apply Disable IPv6 in WAN, LAN & misc Disable deep packet in misc Enable turbo mode Enable super turbo mode Ensure the ethernet cables you're using connecting the R1 to hub & R1 to PC are Cat5e+/can handle your speeds. Do a wired speed test from a PC Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.