CleanSlate Posted May 11, 2016 Share Posted May 11, 2016 So ive set it all up correctly just plugged the netduma in to it before i was getting 75mb with the HH5 but since swapping it for the HG612 im getting speeds of 69mb down Before Speedtest (HH5) After Speedtest (HG612) Link to comment Share on other sites More sharing options...
Macca65 Posted May 11, 2016 Share Posted May 11, 2016 So ive set it all up correctly just plugged the netduma in to it before i was getting 75mb with the HH5 but since swapping it for the HG612 im getting speeds of 69mb down Before Speedtest (HH5) After Speedtest (HG612) Does it not take a little while for the unit to "bed in" to get the correct speeds, although they are not far off Link to comment Share on other sites More sharing options...
CleanSlate Posted May 11, 2016 Author Share Posted May 11, 2016 Does it not take a little while for the unit to "bed in" to get the correct speeds, although they are not far off I'm not too sure but i updated the bandwidth settings in congestion control and a warning message popped up on the netduma stating this Link to comment Share on other sites More sharing options...
RADDY1993 Posted May 11, 2016 Share Posted May 11, 2016 So ive set it all up correctly just plugged the netduma in to it before i was getting 75mb with the HH5 but since swapping it for the HG612 im getting speeds of 69mb down Before Speedtest (HH5) After Speedtest (HG612) Have you flashed your HG612 with the current custom firmware. Link to comment Share on other sites More sharing options...
Zennon Posted May 11, 2016 Share Posted May 11, 2016 Check directly from the modem port one to a device via Ethernet to rule out a lower sync with the cabinet now you are using a modem. Link to comment Share on other sites More sharing options...
CleanSlate Posted May 11, 2016 Author Share Posted May 11, 2016 Have you flashed your HG612 with the current custom firmware. Im using the latest one cause it came unlocked when i brought it. Link to comment Share on other sites More sharing options...
CleanSlate Posted May 11, 2016 Author Share Posted May 11, 2016 Check directly from the modem port one to a device via Ethernet to rule out a lower sync with the cabinet now you are using a modem. Sorry Zen im lost what do you mean? Link to comment Share on other sites More sharing options...
RADDY1993 Posted May 11, 2016 Share Posted May 11, 2016 I think he means connect you PC/Laptop via Ethernet to the number i poet on your modem then go into the GUI and see what your sync speeds are. You can view the info as below. Link to comment Share on other sites More sharing options...
CleanSlate Posted May 11, 2016 Author Share Posted May 11, 2016 Tried to put my modem in PPPoE mode but it's not having none of it heres image below not sure what to do here. Link to comment Share on other sites More sharing options...
Zennon Posted May 11, 2016 Share Posted May 11, 2016 You need to enter your user name and password then click submit, Re our shoutbox convo. nfx is doing this because of the speed limitation of PPPoE on the duma. Link to comment Share on other sites More sharing options...
RADDY1993 Posted May 11, 2016 Share Posted May 11, 2016 Tried to put my modem in PPPoE mode but it's not having none of it heres image below not sure what to do here. Capture7.PNG is this what you mean https://forums.overclockers.co.uk/showthread.php?t=18477721 Link to comment Share on other sites More sharing options...
CleanSlate Posted May 11, 2016 Author Share Posted May 11, 2016 is this what you mean https://forums.overclockers.co.uk/showthread.php?t=18477721 That's the one Raddy but i can't go by them cause the images are dead so from step 3 to 5 its confusing cause it says disable service list not sure what that means? Link to comment Share on other sites More sharing options...
Zennon Posted May 11, 2016 Share Posted May 11, 2016 Yes but route mode so he can use PPPoE on the modem so the duma does not have to , to gain full speed as he has max attainable. Link to comment Share on other sites More sharing options...
CleanSlate Posted May 11, 2016 Author Share Posted May 11, 2016 Heres some screenshots from wan and dhcp im lost on what to do here? theres connections in the WAN Section do i edit one or make a new one? Link to comment Share on other sites More sharing options...
Zennon Posted May 11, 2016 Share Posted May 11, 2016 DHCP page is fine. Basic > WANUnder Port Binding untick LAN 1 and LAN 2Connection Mode: RouteConnection Type: PPPoEUser name: Your FTTC usernamePassword: Your FTTC password Press submit Link to comment Share on other sites More sharing options...
CleanSlate Posted May 11, 2016 Author Share Posted May 11, 2016 DHCP page is fine. Basic > WAN Under Port Binding untick LAN 1 and LAN 2 Connection Mode: Route Connection Type: PPPoE User name: Your FTTC username Password: Your FTTC password Press submit Thanks Zen but what list under WAN should i edit the INTERNET Service List or the TR069_INTERNET Service List one to change it to PPPoE or make a new one? Thanks again for all the guys means a lot Link to comment Share on other sites More sharing options...
Zennon Posted May 11, 2016 Share Posted May 11, 2016 I am assuming you are in port 2 to access the GUI , switch from port 2 to port one to test for internet. Link to comment Share on other sites More sharing options...
Zennon Posted May 11, 2016 Share Posted May 11, 2016 Thanks Zen but what list under WAN should i edit the INTERNET Service List or the TR069_INTERNET Service List one to change it to PPPoE or make a new one? No leave them. Make sure in the LAN tab that DHCP is ticked Link to comment Share on other sites More sharing options...
CleanSlate Posted May 11, 2016 Author Share Posted May 11, 2016 No leave them. So you see these check boxes Zen do i leave them unticked or tick one im not sure? Link to comment Share on other sites More sharing options...
Zennon Posted May 11, 2016 Share Posted May 11, 2016 Leave everything except what I have asked you to change. Link to comment Share on other sites More sharing options...
CleanSlate Posted May 11, 2016 Author Share Posted May 11, 2016 tried it Zen it's not having none of it can you check this see if i did it right? please. Link to comment Share on other sites More sharing options...
Zennon Posted May 11, 2016 Share Posted May 11, 2016 That all looks good and in the LAN tab you have DHCP selected? If it does not work for you after all this you have two options put it back in to bridge mode and use it that way or put the HH5 back into action. Link to comment Share on other sites More sharing options...
CleanSlate Posted May 11, 2016 Author Share Posted May 11, 2016 That all looks good and in the LAN tab you have DHCP selected? If it does not work for you after all this you have two options put it back in to bridge mode and use it that way or put the HH5 back into action. yeah il try one more time something tells me im missing something if not il just use it with PPPoE on the duma and leave it as that. thanks for the help Link to comment Share on other sites More sharing options...
Zennon Posted May 11, 2016 Share Posted May 11, 2016 No bother mate. Link to comment Share on other sites More sharing options...
CleanSlate Posted May 11, 2016 Author Share Posted May 11, 2016 No bother mate. Zen i managed to get PPPoE working and directly connected it uup to the pc but the speed is lower about 43mb now. i found what is causing the loss of internet the hg612 is not handing out the dns servers how do i fix that? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.