tjmr25 Posted April 3, 2016 Share Posted April 3, 2016 http://imgur.com/cSm0E6uThese are my results wired into netduma (the second and third from the top) VS wired directly into my router(all other results). I have download/upload cap set to 100%, and for the ones shown here I had the distribution reset so everything was 11. I thought maybe I should try putting ALL of the distribution to my PC and running a speed test but that only gave me 56 D/L speed which is in the same ball park as the others. Is this normal or have I probably messed with a setting I shouldn't have? I thought it was the distribution but that still gave me low DL speeds with it set all to my PC. Link to comment Share on other sites More sharing options...
BulletSponge Posted April 3, 2016 Share Posted April 3, 2016 Hi, what are your setup and your speeds? Assuming Modem -> R1 -> All other devices I´d start by typing in bandwith (Congestion Control Page). Its in Mbps. Then I´d let the Netduma do the setup (You will be asked if this shall be done). Are you in a very populated area? That could also cause problems due to a lot of people being online. Link to comment Share on other sites More sharing options...
tjmr25 Posted April 4, 2016 Author Share Posted April 4, 2016 Hi, what are your setup and your speeds? Assuming Modem -> R1 -> All other devices I´d start by typing in bandwith (Congestion Control Page). Its in Mbps. Then I´d let the Netduma do the setup (You will be asked if this shall be done). Are you in a very populated area? That could also cause problems due to a lot of people being online. I have the bandwith set to 90 which is around what I get WITHOUT the netduma connected. No I am not in a populated area, as you can see in the picture I posted I get above 90 download speeds in my area without netduma connected to my router, but as soon as I connect my netduma it cuts the speed in half. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted April 4, 2016 Administrators Share Posted April 4, 2016 Have you allowed the duma to auto setup for your speeds? You should be using the reactive algorithm. Link to comment Share on other sites More sharing options...
tjmr25 Posted April 14, 2016 Author Share Posted April 14, 2016 Have you allowed the duma to auto setup for your speeds? You should be using the reactive algorithm. yes im using the reactive algorithm. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted April 14, 2016 Administrators Share Posted April 14, 2016 Do the following: Input into bandwidth settings 100% anti-flood Reactive algo Share excess enabled Reset device prioritisation & apply Remove anything from hyper traffic Disable IPv6 in WAN, LAN & Misc Disable Deep packet in misc Do a wired speed test from your PC If that doesn't work enable turbo mode in misc settings Link to comment Share on other sites More sharing options...
tjmr25 Posted April 15, 2016 Author Share Posted April 15, 2016 Do the following: Input into bandwidth settings 100% anti-flood Reactive algo Share excess enabled Reset device prioritisation & apply Remove anything from hyper traffic Disable IPv6 in WAN, LAN & Misc Disable Deep packet in misc Do a wired speed test from your PC If that doesn't work enable turbo mode in misc settings Ive done everything you listed but I cant find hyper traffic or turbo mode anywhere. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted April 15, 2016 Administrators Share Posted April 15, 2016 Ahh you're not on the latest version. You will need to upgrade - please follow the instructions here carefully http://forum.netduma.com/topic/11018-major-netduma-upgrade-now-available-v-1036/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.