RedBull2k Posted March 25, 2016 Posted March 25, 2016 result, at 100% speed achieved is 72Mbps @99% is 48Mpbs @60% 39Mbps, to me this is a bug turning deep packet inspection off does not change, because i set my bandwidth at 78 and i have cc @99% then my speed is below 50Mbps do i then change to preemtive as it says to be on reactive if you have a 50Mbps+
CleanSlate Posted March 25, 2016 Posted March 25, 2016 Tick Turbo mode in Miscellaneous Settings and change to reactive in CC and make sure deep packet is off and untick ipv6 in wan lan and in Miscellaneous Settings untick Enable link-local IPv6.
RedBull2k Posted March 25, 2016 Author Posted March 25, 2016 i thought turbo mode was for 100Mbps? all the other things you say i have already done.
CleanSlate Posted March 25, 2016 Posted March 25, 2016 Well i get 75 mb down and it gives me my advertised speed it helps give it ago and see if it works for you.
YT_LowPingKing Posted March 25, 2016 Posted March 25, 2016 Good tip bro! Just checked turbo myself for 66d 4u and actually getting better performance. Thanks
RedBull2k Posted March 25, 2016 Author Posted March 25, 2016 maths wasnt my strongest point so @100% i get 72 @90% i get 57 10% of 72 is 7.2 so im going to round off 7.2 to 7 20% of 72 is 14 72-7=65 65-57 =8 8+7=15 which is roughly 20% of 72 now clearly at 90% its taking 20% instead of 10% or am i missing something?
Administrators Netduma Fraser Posted March 26, 2016 Administrators Posted March 26, 2016 Preemptive is more conservative so it will lower it a bit more. Use reactive, it's for speeds above ~60mbps
RedBull2k Posted March 27, 2016 Author Posted March 27, 2016 I am using reactive, and @100% im currently getting 74.1 and @99% 54.5. @50% i get 36.4 so between 51% and 99% there is something definitely wrong. upload is working fine.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.