RedBull2k
-
Posts
948 -
Joined
-
Days Won
9
Everything posted by RedBull2k
-
When you launch your cod game you will see all these data centers, if you block these then you wont get any servers from that data center this will avoid you denying every one. In my second image i have only allowed the uk data center. (I did this by enabling geo 2 mins before i lauched call of duty game) In multiplayer when you search for game you will see that it works becasue the lobby ping when searching will not change.
-
you dont just have 1 game server in your home location. you prob have 100's you do however use a data center that connects you to these servers. Launch the game with your geo enabled in your location, once it blocks the data center then you will not connect to those servers that it uses.
-
top tip i can give. is make sure you enable geo filter atleast 2 mins before you launch your game. if you enable after the game is launched then it wont work right, if at all.
-
few simple questions. 1. is he using another isp 2. are you both connected to ethernet. 3. are you using geo filter and also first make it a fair test. Connect to his edge see if you can get those pings. then secondly if you can, well lets see that result first before offering more advice. @rdgbasilio
-
Prioritizing devices/games/services doesn't work
RedBull2k replied to PSNPlayer's topic in Netduma R2 Support
No. What he's saying all devices must connect to r2 and ur r2 connects to ur hub only. That way the r2 can do the magic. If you have other devices connected to ur hub via ethernet or WiFi then the r2 can not take that into account. -
When you launch mw2 or any cod game by the time you get to the main menu of the game if you take a look at geo filter you will see that the game tests to see what locations are avaiable (if chille doesnt pop up on the geo filter then it is likerly, that location is down.), and in your case this is the ip address 66.203.113.63 this tells me that https://latitude.sh are your main server https://lg.latitude.sh/
-
Ping heat map is just an indication of what pings are like in that area. it does nothing else! Just waiting on a cloud update. these pings are going to be simular to other cod games. there are many factors why your ping is in the 100's. When it is in the 100's where does geo filter say your connected to?
-
no worries if not to hand, was only curious
-
I think you need DLM to decide what is best for your line. Recreating a scenerio from yester year may not give you the desired results. I dont think it has g.inp My memory was going back to 2015 i too frequented kitz and overclockers forum What are your current stats?
-
My line doesnt support g.Inp so didnt really notice if they did or didnt. off the top of my head you could adjust the snr from within the gui ([-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6]). Why has it become inportant to change your SNR have you taken a hit from DLM? apparantly if your changing the snr your end on VDSL2 your going to cause problems for others who are connected to the same cab. I currently use a netgear DM200 that i purchased for £20 i use stock firmware in bridge mode
-
ive had a few of asus modem/routers while on VDSL2. it suffered really badly with random disconnections and messed up DLM. I too also messed with it changing SNR but to no avail as after a reboot the settings would be lost, and id have to do it again and that would also cause another disconnection. ive had the dslac68u and dslac88u also the dsl66u they all pretty much sucked. They were never SIN approved by openreach.
- 354 replies
-
- 1
-
.png)
-
- intel puma
- jitter
- (and 6 more)
-
https://www.currys.co.uk/gbuk/gaming/pc-gaming/gaming-monitors/benq-zowie-xl2411k-full-hd-24-tn-gaming-monitor-black-10218893-pdt.html This is only 1080p at 120hz i use it right now
-
Share Your Netduma Settings For MW/CW/WZ
RedBull2k replied to Infoseye's topic in Call of Duty Support
Im in the UK, most games are played on UK Amsterdam France Spain Germany My latency is ok on all of them. Dont get me wrong i have my moments/days/weeks its really laggy sometimes even when all the signs point it should be good. I just dont know what gets into it to make it not enjoyable.
-
Share Your Netduma Settings For MW/CW/WZ
RedBull2k replied to Infoseye's topic in Call of Duty Support
ps5 no geo Congestion 70/70 (60/18 speeds set in congestion) Always In DMZ DumaOS classified games. Wifi Turned off(use my XR500 in access point) Add blocker Off no VPN -
There is a feature to use a server for chat party. can be found in voice chat settings maybe this is why you get a server showing.
-
Still working on it.
-
It doesnt do anything like that. If you think that only using the current game port in traffic priority works best for you then this file will help with doing that for you that would otherwise be a long process.
-
Its an app that was made on duma os 2.0. Some features that are on there are on duma os 3.0 by default yes there are some other things on there but was made on duma os 2.0. so not expected to work. Good news. I will be making an updated version.
-
This app was made b4 the r2 came out, its likely not going to work. Only works on duma on 2.0 as that is what it was made on. Thanks for trying the app.
-
Use it at your own risk! Original topic has been linked in this thread by myself a couple of posts back. From that you may understand why it was made and how to use.
-
yes delete the file new settings on desktop. Its not for openwrt
-
only tested on PC and PS4, the port is editable for reasons like this.
-
I reported this back in March. My app has to get the port after the connection is made and that is the reason why. You can get manual ports to work and you have to have the port in there before a connection is created. From memory this is only the case on the r2. - When they fix it their end then my app will work as intended.
-
It should work, delete file on desktop named newsettings.txt and re open my exe
-
try this https://1drv.ms/u/s!ApLNR75YpVCMqTq-Z67c40Pt57Xf?e=s0FrsB
