euphidra

@Netduma Fraser Found the problem. UPnP needs to be enabled in DHCP. I was only using port forwarding on eFootball via PPPOE. Can I use UPnP and port forwarding at the same time?

@Netduma Fraser My congestion is 70% download and 70% upload. I have a 200 MB FTTC TIM Fritzbox 7590 Tim Edition. What percentage should I change in DHCP?

@Netduma Fraser It loses quality in DHCP mode, meaning that while I'm using 5GHz WiFi on a TV in another room, while I'm watching a YouTube video, the video resolution drops and then reverts to the previous resolution. This doesn't happen in PPPOE mode. I believe there's a bug in the official firmware 4.0.540 that causes WiFi stability to drop in DHCP mode. Since you're developing the new firmware, I'm reporting this issue while I wait to test it once it's released. R3_2025-11-16T09_08_55.756Z_logs.txt

@Netduma Fraser I had it set to automatic. But I don't understand why it doesn't cause problems in PPPOE but it does in DHCP.

@Netduma Fraser @Netduma Alex Hi Fraser and Alex, when I connect the TIM modem to the Netduma R3 via PPPOE, the 5GHz WiFi doesn't lose any quality on the TV, but then it returns to normal. However, if I connect the R3 via DHCP, this problem occurs with the 5GHz WiFi. I keep the bands separate. I have the official firmware 4.0.540. I'm cascading the modem again via PPPOE on the Netduma R3. I have a Fritzbox 7590 TIM Edition modem with the official FRITZOS 8.20.

@Netduma Fraser Hello Fraser, but what's the new firmware I tested? Is it still out?

@Netduma Fraser Hi Fraser, I have official firmware v4.0.540 watching on Amazon the Champions League match in LAN is seen in low definition. Connected in 5Ghz wifi and returns high quality again. What problem does this Netduma R3 have?

Sorry Fraser I posted under that user's suggestion. Then I read that you had replied to the post.

@Netduma Alex @Netduma Fraser Hi would you add UFL to the games list. Thanks.

@Netduma Fraser @Netduma Alex The server list in the ping heatmap is at the beginning of the post and it has not been done. Thanks if you do it.

@Netduma Fraser For me it should indicate the ping on the geofilter from the VPN access point instead the ping is always the same as being without the VPN. I'm talking about eFootball. The servers are missing to update on the ping heatmap. The ping on the ping heatmap is not true looking at the ping without active steady ping. The ping on the server, playing is lower.

@Netduma Fraser @Netduma Alex Still no cloud updates with the new eFootball 2024 servers. Fix ping on eFootball ping heatmap being higher than it actually is in gaming without steady ping. Thank you. You have the server list in this thread.

@Netduma Fraser @Netduma Alex This R3 router is not top of the line. Too many problems. The VPN not working well with PPPOE mode. DHCP mode on eFootball the graph that works in PPPOE does not appear. If you deactivate the VPN you have to restart the router because the speeds are low in PPPOE but after restarting it works with the VPN turned off even the PS5 tests are high. Fix these problems or I'll have to change routers.

@Netduma Fraser @Netduma Alex FTTC in PPPOE from low speeds while FTTH in VLAN works. I reconfigure with DHCP but I deactivate steady ping and I don't care about the graphics because it doesn't work as it should. Fix Hybrid VPN.

@Netduma Fraser @Netduma Alex Hi Fraser and Alex, the problem is the DHCP mode which does not show the steady ping graph without and with VPN. In PPPOE mode the graph works without VPN and with VPN it loses ping synchronization for a few seconds and starts again immediately. I didn't do any R3 reset after update 4.0.236 (Installed the early access and twice the official one but the problem was waveform bufferbloat which didn't work for a few days). What do you recommend me to do or do you have to make other changes to the hybrid VPN? I haven't done any rest on Netduma R3.

@Netduma Fraser @Netduma Alex On efootball it stabilizes the ping on the Milan server but there is no ping graph. This ping graph never works.

@Netduma Alex @Netduma Fraser Hi Fraser and Alex, why doesn't Adblocker block YouTube advertising on smart TVs in wifi mode? There is a list to be entered manually. The various adblock extensions on PC browsers work but on Netduma R3 they don't. P.S. When you set up the Hybrid VPN with steady ping the graph does not appear. Thank you. Now I install the firmware 4.0.227 Early Access R3.

@Netduma Alex @Netduma Alex Hi, could you fix the problem with an early access firmware. Thank you.

@Netduma Alex @Netduma Fraser Still no cloud updates with the new eFootball 2024 servers.

Thank you Fraser.

@Netduma Fraser @Netduma Alex Hello Netduma, Steady ping and vpn does not work nor the graph and stabilizes the ping with firmware 4.0.219. With the previous version 4.0.214 and 4.0.209 it only stabilized the ping but the graph never appeared. So steady ping with the VPN needs to be fixed. Thank you.

Thank you Fraser.

@Netduma Fraser @Netduma Alex Hello Netduma, updated eFootball 2024 ping heatmap servers after eFootball version 3.6.0 update Here is the list of servers:

@Netduma Alex @Netduma Fraser The allow ping feature does not work even if you enable or disable the ShieldsUP test! from Ping Reply (test failed). While on the modem without router it would be the ipv4 ping response function that if I deactivate Ping Reply from (passed test). GRC | ShieldsUP! — Internet Vulnerability Profiling

Ok. Thank you. @Netduma Fraser