Jump to content

Jermsz

R2 Early Access
  • Posts

    136
  • Joined

  • Last visited

Everything posted by Jermsz

  1. No PPPoE from my ISP
  2. It's on the most recent version. I confirmed with my ISP as it gets updates directly from them.
  3. I test with speedtest.net. The only wan port I have on the modern is 2.5 Gbps but regardless of which port on the R3 I'm only pulling 3 to 5 hundred mbps
  4. I recently had my internet upgraded to 1 gb down and 40 up by my ISP (soon to be 1000 down and 1000 up in a few days) and have been having issues with speeds. When directly connected to my modem I confirmed I'm getting the proper does. Even when I run the speed test in the duma OS software I'm getting the proper speeds. But as soon as I wire into the R3 I see 300 to 500 mbps. So it sounds like the R3 is the bottlebeck here. My setup is my cm3000 modem, into my R3, into my XR1000 as an AP. And I'm using cat6 cables for everything. I also confirmed all the Ethernet ports I use for the test are also 1gb. Any help or suggestions would be appreciated.
  5. I'll run a speed test on my R3 next time the 2.4 band goes down and report back. I haven't experienced speed fluctuations before but maybe that's what's been happening all along and I never noticed? Doesn't explain how my 5G band is still up and running though. Regardless I'll test it and let you know.
  6. I've actually been using this to find the best channel as I thought the same thing. It helped with my 5G band but the issue is still present in the 2.4 band.
  7. So I have my modem connected an my R3 then that connected to my xr1000 in AP mode running then latest stable firmware. I was hoping to get the lastest beta FW for the XR1000. My question is would that matter or make a difference at all? Right now I have to reboot my XR1000 every day or so because the wifi will slow to a crawl so I was hoping the lastest beta would fix that. Not sure if it actually will though since dpi and priorization are happening on the R3. Let me know. Thanks!
  8. Yes that's what I meant. Thank you for clarifying.
  9. So I've got an XR1000 in bridge mode connected to my R3. I was wondering in smartboost if I should prioritize the XR1000 before everything to see if that would make a difference in network traffic.
  10. This happens to me only when geo latency is turned on. Try turning it off and see if you still get out in servers outside your range.
  11. Is it possible to be sent the .456 firmware? Is the fixed implemented in that version?
  12. Recently went back to sparking zero after the updates and found that the R3 is not detecting the traffic as gaming or the traffic at all. Can we get an update to allow this?
  13. Application name: Zoom Contact Center & Bomgar Device type used for capture: Win 11 Laptop Any other comments: Zoom Contact Center is used for for calls (VoIP) Bomgar is remote software I use to remote into users machines. This is basically work from home traffic. Zoom Contact Center 2.pcapng Zoom Contact Center 1.pcapng Bomgar 2.pcapng Bomgar 1.pcapng
  14. Application name: Streameast & Methstreams Device type used for capture: Win 11 Laptop Any other comments: Websites that are used from streaming sports, just want to make sure that they get recognized by smartboost so they can be prioritzed. Streameast 1.pcapng Streameast 2.pcapng Methstreams 1 .pcapng Methstreams 2.pcapng
  15. How long does it typically take for them to update to cloud in order to detect certain traffic?
  16. After resynchronization, it's still not detecting OpenVPN traffic via DPI
  17. If I'm using hybrid VPN via the OpenVPN protocol wouldn't smartest detect the traffic as OpenVPN and then whatever traffic I'm sending, like Netflix or YouTube for example? I know VPN encrypts traffic but does that also stop DPI? All traffic just shows as unknown and not even OpenVPN. Help/thoughts please
  18. Looks like there's an issue with autofilling from my password manager, so I'll just copy and paste. Issue replicated in incognito as well. But for now I have a workaround. Thanks Fraser!
  19. Application name: Windows Update Device type used for capture: Win 11 Laptop Any other comments: Was downloading the most recent update and saw the traffic was showing as unknown in smartboost Windows Update 4.pcapng Windows Update 1.pcapng
  20. I can assure you I'm not clicking it at all. I'm using my 1password to fill in credentials then clicking sign in. I've tried it disabled but the issue keeps coming up.
  21. I'm having trouble signing into the netduma forums on my laptop. I keep getting redirected to Facebook even though I have no account. This is stopping me from posting caps for apps I would like added. Is there a way that get around this?
  22. Application name: Global Protect Device type used for capture: Win 11 Laptop Any other comments: This is a VPN that I use when I work from home connected via the IPSec protocol. So I guess it would classify under work from home/VPN Global Protect 2.pcapng Global Protect 1.pcapng
  23. The most recent update definitely helped the feel server wise when not playing at peak time. I've played with a bunch of settings and I don't think any of this is netduma related. The game just came out and with all shooters, there's normally issues with servers in terms of desync, lag, etc. Think if Xdefiants launch and how bad it was dying around walls and what not. It'll get fixed eventually. This happens every year with cod, although maybe not as bad as this year but it will get fixed eventually. My wonder is why they can never release the servers in great working condition if they've been working on the game for years? Why can they just increase the server update rate in order to mitigate these issues? Bad QA testing imo, whether you have a netduma or something else. Just gotta wait until they fix it, hopefully with the season 1 update.
×
×
  • Create New...