Asjb123

Will check back Monday! Glad to see some new firmware coming out!

iOS This started happening after I upgraded to .50 but reverted back to beta, as I started having heavy buffer bloat on both 2.4 5g Wi-Fi bands, also happened before the DumaOS app update. Just odd after updating firmware then restoring it would cause that issue. And I have since done restoring up the factory firmware shipped on the router VIA FTP then installed beta again still won’t load.

Yes I have tried that as I found that as a working solution previously, however I have tried that several times and just prompt with. And I have tried rebooting and reinstalling firmware, just will not seem to load

Yes I had noticed that from previous tests, however I will check just to see if it is running, mind you I was getting +A buffer bloat tests, fresh coaxial dropped and the only thing that will correct it “ without rebooting” is resetting the distribution. ( mind you its always kept even distribution)

Hey guys, hopefully you can assist with this. As the DumaOS app will not login to the router, I have installed factory firmware VIA FTP method, then factory reset. Then install XR700-V1.0.1.34_Dumaos3.0_6.img. Then factory reset again. I am able to setup router via IP address. But QOS, Buffetbloat keeps occurring, which can be cured by resetting distribution. but any suggestions would be greatly appreciated, or better yet a new version of DumaOS Thanks, Aaron.

Hey netduma Team really love this router software, However it seems every version I've tried there is always issues with applications for netduma OS. First off my internet is spectrum cable 500mb service, I just had all Coax replaced from the drop along with the terminals on the pole and all terminals to the house, So there is no issue with internet company as i checked modem signals and they are all almost perfect in signal levels, I also further complained due to latency and spoke with a lvl 3 tech from spectrum that replaced a damaged line on the pole so there is 100% internet issues ruled out by IP provider. Also on any firmware versions 1.0.1.34 above i have discontinued use of the WAN 10g port. Main one being Buffer bloat, WIFI along with DHCP always assigning devices the same IP Address which causes problems. So far for launch firmware V1.0.0.20.anything between 1.0.1.20 Has issues using the WAN port and i had to buy an adapter to use the WAN 10g port along with applications not working correctly. I was having 0 issue with the beta firmware for quite sometime but then noticed i would get the application loading error, where it just would constantly get stuck trying to load. so i decided to try the 1.0.1.48 then i started having WIFI issues ( yes the signal was strong I had disabled Smart connect and also ) the issue with the Wi-Fi is that devices would just stop loading anything web browsing/video streaming/gaming would just get stuck with massive latency almost as if the connection was throttled on every device. And to address the buffer bloat i have to constantly reset the distribution in congestion control, MY settings were apply : always, DL 78% UL 95% when testing ( no other devices using the internet) my buffer bloat was A+ however this would not stay consistent after a few hours and only thing that would fix it is rebooting router, then found out resetting/updating distribution would resolve the issue. I then also removed the Netgear nighthawk Wi-Fi extender I was using. still to my surprise the Wi-Fi issue still persisted i then factory reset and attempted to use the V 1.0.1.50 and still the above Wi-Fi/buffer bloat issues persist. SO my next step is to factory reset current FW version then FTP install V1.0.0.20 then re-install XR700-V1.0.1.34 dumaOS 3.0 beta firmware. I just seem to notice every time i re-install firmware on the XR700 different issues always arise but its always with the main functions you would purchase the router for. to use those specific functions, and they are always APP, WIFI, buffer bloat related. my question is will we ever have a firmware that 100% works i know netduma team does not have full control over Netgear issued Duma os routers, but there surely has to be something that can be done for 1 version of a stable firmware where all functions advertised for the router works, As at this point i would second guess allowing the netgear team use your software as they are tainting the name, That or netgear is using subpar chipsets in these dumaOS routers. Please if you have any other suggestions let me know, and please do not give me lvl 1 or lvl 2 advice, I would just like a 100% working version that does not require constant " work arounds " Thanks, Aaron.

Yeah, I have installed 1.0.1.50 twice factory resetting before and after,.and I have Wifi issues, along with horrible bufferbloat I have QoS enabled, and it does not limit connection speed. However if I reset speed to each device.and it applies the bufferbloat issue will start working again, but randomly stops working and will notice when playing games there will be enormous lag, and I just had ISP replace all wiring to house so that is not the issue. I've also ran into apps not loading and that.is.also.accompied by wifi lag (assuming bufferbloat kicking in) going to try loading dumaos3.0 beta again. As there is some.issue with .50, really wish they would give a solid working firmware....