Netduma Admin

@omni72 - have you been able to verify that port 7777 is open? See the guide we linked at the top for instructions on how to do this. @henris - did you test if port 7777 is open? It may still be even you don't have DMZ etc. See the guide linked in the first post on how to do this.

What do you mean exactly? If you fill in the disclaimer form you will receive a download to install on your router. This thread is just for people on very old versions who need us to send them a manual fix.

Username: admin Password: password (en anglais, pas francais)

If you have received the download link to the R1 beta firmware but your version of DumaOS is lower than 1.03.6 (for example, 1.03.3), then there is a high probability of you permanently breaking your router when upgrading. (To check your firmware version, follow this guide). To solve this problem, we need to run a simple fix on your router. Please follow the instructions here to allow us to do this. Once you have done this, please post in this thread to ask us to get your router ready for the upgrade. You do not need to post your IP address.

Je vous recommande d'activer vos paramètres de contrôle de congestion (QoS0. Par exemple, Anti-Flood devrait être réglé à 70% pour le téléchargement et le téléchargement. Mais en général, vous avez une bonne connexion, donc je ne m'inquiète pas.

Hi Hellfish - could you start a new topic for your issue please. Could you include information on your QoS (Congestion Control) settings, as well as your total bandwidth etc. Thanks.

Great, thanks for giving them the additional information.

The whole settings section on the XR500 is NETGEAR's, on the R1 it is our own. I'll need to check with Fraser as I'm not sure if this will be included. I'll need to check with Fraser as I'm not sure.

Gracias por hacernos saber. Fraser está de vacaciones hasta el martes, así que lo vincularé con este hilo cuando regrese para confirmar cuándo investigará esto. Creo que ahora hay un problema conocido con las VLAN y la carga, por lo que este podría ser el mismo error. Él podrá confirmar. __ Thank you for letting us know. Fraser is on holiday until Tuesday so I will link him to this thread when he is back to confirm when he will look into this. I believe there is now a known issue with VLANs and upload, so this could be the same bug. He will be able to confirm.

¿Podría intentar poner PPPOE en su módem en lugar de su XR500, por favor? Esto debería, con suerte, arreglar tu problema. __ Could you try putting PPPOE on your modem instead of your XR500 please. This should hopefully then fix your problem.